Series DT-8300 Digital Thermometers0 pages
Temperature Products
Series DT-8300 Digital Thermometers
DESCRIPTION
SPECIFICATIONS
The AMETEK DT-8300 Digital Thermometer is a
rugged, field
instrument
designed for
dependable,
worry-free
temperature
measurement
anywhere in
the plant. This
unique device
can be used
with any Type
K thermocouple
to provide
quick,
convenient,
Model DT-8300
continuous
monitoring of liquid and gas processes.
t The DT-8300 is ideal for use in hard to reach
places such as overhead pipes since it can be
mounted remotely from the sensor by use of
thermocouple extension wire. Four configurations
provide for wall, pipe, panel, or stem mounting.
The stainless steel housing and one piece VALOX®
bezel/face provide a corrosion resistant package for
harsh environments. This device performs reliably
over a wide ambient temperature range.
t The large, easy reading LCD display features low
power and open sensor indication. A self-powered
version is available incorporating commercially
available size AA batteries for approximately
1.5 years of continuous operation. An external
power model is also available for operation with
an unregulated 6 to 28 VDC power supply. The
DT-8300 is also inexpensive, priced far less
than comparable electronic field temperature
instruments.
RANGES: Low: -50ºF to 450ºF (-50ºC to 250ºC); High: 400ºF
to 1500ºF (200ºC to 800ºC)
INPUT: Type K thermocouple; supplied by U.S. Gauge
distributor or customer, Type J and E inputs also available
ACCURACY:
Basic Accuracy: ±1% of full scale (excluding T/C error)
Conformance (to ANSI MC95-1): Low Range: ±2.2ºF (1.2ºC)
from –40ºF to 450ºF
High Range: ±2.7ºF (1.5ºC) from 400ºF to 1500ºF
Cold Junction Compensation And Zero Drift: .08 degrees
(F or C)
Span Drift: .008% of reading/ºF (0.015% of reading/ºC)
Resolution: 1ºF (1ºC)
CALIBRATION ADJUSTMENT: Screw adjust permits
calibration to within 1ºF (1ºC) at any desired point
OPERATING TEMPERATURES: -13ºF to 160ºF (-25ºC to
72ºC), depending on power supply
SELF-POWERED VERSION: Battery, 8 Size AA: 1-1/2 years
continuous operation, typical. Note: Ambient temperatures
above 100ºF may shorten battery life
EXTERNALLY-POWERED VERSION:
Supply Voltage: 6 to 28 VDC (unregulated)
Supply Current: 0 to 2.5 mA
INTRINSICALLY SAFE (FM APPROVED): Battery powered
models are intrinsically safe, for Class I, II, and III, Division
1, Groups A, B, C, D, E, and G hazardous locations using U.S.
Gauge battery board (accepts 8 AA batteries, not included)
P/N 156834 and when installed in accordance
with U.S. Gauge instructions AU-3459-F
External powered models are entity approved for safe
operation in Class I, II, and III, Division 1, Groups A, B, C, D,
E, and G hazardous locations in accordance with U.S.
Gauge instructions AU-3459-F
V max = 18.7 V, I max = 150 mA, capacitance equals 0.4 µF,
Li = 0.0 mH
External powered models are also entity approved for safe
operation in Class I, II, and III, Division 1, Groups C, D, E,
and G hazardous locations in accordance with U.S. Gauge
instructions AU-3459-F
V max = 26.7 V, I max = 150 mA, capacitance equals 0.4 µF,
Li = 0.0 mH
DISPLAY: 3-1/2 digit liquid crystal (LCD) 0.7” high numerals;
update rate once per second; display blanks out for low
power condition and displays large, negative number when
thermocouple or extension wires are open
HOUSING: NEMA 4X design; 1/4 DIN; 302 stainless steel
with one piece, VALOX front face/bezel and neoprene
gasket; environmentally sealed with one-way valve for
battery venting
CONNECTIONS: 1/2-14 NPT stainless steel half couple seal
welded to case
ALL ORDERS CAN BE SENT TO:
On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com
© 2008, by AMETEK, Inc. All rights reserved.
Printed in the U.S.A. 908PDF (160166)
Sales/Technical Support: 215-257-6531t
900 Clymer Avenuet
Sellersville, PA 18960 U.S.A.t
Customer Service: 727-536-7831t
8600 Somerset Drive
Largo, FL 33773 U.S.A.
Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.