Road Paver AFW 270 E/G: Road Paver Wheeled0 pages

Road Paver Wheeled
AFW 270 E/G
The machine of this class has been designed for the use, mainly,
in small and narrow sites where its compact dimensions,
the manoeuvrability and a very good traction are the typical
requirements a contractor needs for this kind of jobs. The traction
on wheels allows a good transfer speed on the road reducing idle times.
Applications
squares and courtyards
small building lots
footpaths
cycle tracks
trenches closure
urban centres
municipal roads and small
parking areas

rollers move in sequence with the hoppers. Man on
board operations from one adjustable seat that can
slide left and right. The dashboard is adjustable to the
seat position to allow easy operations. Ground controls
with anti-vandal guards for the road operator. Foldable
canopy with rear supports to ensure good visibility.
The machine has three axles: front, two axles for steering and rear, axle for traction. The rear axle is fitted with
large pneumatic tyres so that the machine can be driven
also on soft grounds. The actual version is equipped
with four wheel drive traction as a standard. The steering system with a hydraulic pump gives a smooth control when turning. The hoppers are independently controlled by an electric-hydraulic system. The front pushing

Feeding of material
The feeding system of the material is carried out by
two independent and reverse chain belt conveyors
and augers controlled by paddle microswitches that
regulate the flow of material to the screed in order to
maintain the most effective distribution of material in
any condition. The height of the auger group is electrichydraulically adjustable.
Screed options
The FSV 270 E/G is a vibrating screed with gas or
electric heating, automatic lighting and temperature
control, ISR system (Screed Assist) with pressure adjustment.