22A and 24A0 pages

22A and 24A

Issued Sept. 2011 • Index No. M/11.0

24-Volt Constant-Speed
Wire Feeder

Industrial Applications

Quick
Specs

Processes

Input Power

Heavy- or Light-Duty
Fabrication Shops
Trailer Manufacturers
Furniture Manufacturers
Automotive Products
Educational Institutions

MIG (GMAW)
Flux-Cored (FCAW)
Gas- and Self-Shielded

Electrode Wire Diameter Capacity

For use with CV power sources

24 VAC, 7 A, 50/60 Hz

22A: .023 – 5/64 in. (0.6 – 2.0 mm)
24A: .023 – 3/32 in. (0.6 – 2.4 mm)

Wire Speed
Weight

75 –750 IPM (1.9 –19 m/min.)

22A: 36 lb. (15.4 kg) 24A: 40 lb. (18 kg)

The Power of Blue .

®

Wire feed speed range is
75 –750 IPM! This offers a
wider operating range than
the competition.

16-gauge sheet metal
housing is robust in rough
service applications and
less prone to damage.

Trigger hold control allows
operator to make long
extended welds without
having to hold gun trigger.

Run-in standard on 24A
for better arc-starting
performance on a variety
of wires. Optional for 22A.

Gear-driven drive rolls offer
smooth, positive and accurate
wire feed with long, uninterrupted
service life. 24A has four drive
rolls for larger wire diameters.
On-board burnback and motor
ramp control offers unmatched
starting and stopping performance
on a variety of power sources.
This helps to ensure positive
arc starting performance.

Remote voltage control is
standard on 24A. Parameter
adjustments can be made in
weld cell or at a remote location.
Optional for 22A.

Both models include performance-matched Bernard® Q™-Gun,
.035/.045 in. drive rolls and Centerfire™ contact tips.

Specifications

(Subject to change without notice.)

Model

Input Power

Electrode Wire Diameter Capacity

Wire Speed

Dimensions

Net Weight

22A

24 VAC, 7 A,
50/60 Hz

.023 – 5/64 in. (0.6 – 2.0 mm)

75 –750 IPM (1.9 –19 m/min.)

H: 11 in. (279 mm)
W: 10.75 in. (273 mm)
D: 23.5 in. (597 mm)

36 lb. (15.4 kg)

24A

.023 – 3/32 in. (0.6 – 2.4 mm)

Certified by Canadian Standards Association to both the Canadian and U.S. Standards.

Wire feeder is warranted for 3 years, parts and labor.

Miller Electric Mfg. Co.

International Headquarters

Web Site

An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA

Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125

www.MillerWelds.com

40 lb. (18 kg)