Millermatic® 350P0 pages

Millermatic 350P
Issued September 2010 • Index No. DC/12.51
®
Industrial Applications
Quick
Specs
Processes
Fabrication
Maintenance and Repair
Farm
Manufacturing
Industrial
MIG (GMAW)
Pulsed MIG (GMAW-P)
Flux Cored (FCAW)
Rated Output 300 A at 32 VDC, 60% Duty Cycle, 60 Hz, 1- or 3-Phase Input Power
Amperage Range 25 – 400 A
Wire Feed Speed 50 – 700 IPM (1.3 – 18 m/min) MIG Gun
50 – 800 IPM (1.3 – 20 m/min) Spool Gun/Push-Pull Gun
Weight
The Power of Blue .
181 lb (82 kg)
Standard MIG System Comes Complete with:
Bernard® Q300 15 ft (4.6 m) MIG gun with extra
Centerfire™ contact tips
10 ft (3 m) Industrial power cord (without plug)
for single- or three-phase
10 ft (3 m) work cable with clamp
Factory-installed gas solenoid
Argon mix regulator/flow meter
Factory-installed, low-mounted running gear/
cylinder rack
.035/.045 in (0.9/1.2 mm) reversible V-groove
drive rolls (order U-groove drive roll kits for
aluminum welding)
Set-up and operation CD
®
Built-in Pulsed MIG programs
● .035 and .045 in (0.9 and 1.2 mm)
for mild or stainless steel.
● .035 and .047 in (0.9 and 1.2 mm)
for 4000 and 5000 series aluminum.
● .045 in (1.2 mm) for metal core.
All programmed information is stored
for MIG, push-pull and spool guns,
and is restored after each power up.
1- or 3-phase input power with line
voltage compensation for constant
output even with fluctuations to the
input power.
Special features
● Run-in adjustment for MIG, push-pull and spool guns.
● Built-in 2-minute spot timer.
● Pre-flow and post-flow adjustment.
● View actual welding amperage/voltage during
welding, and 5 seconds after arc has shutoff.
● SharpArc™ controls welding arc cone width in
pulsed MIG welding mode.
● Inductance control customizes weld output
characteristics in MIG welding mode.
Aluminum Pulse Hot Start™
automatically provides more arc
power to eliminate a “cold start”
that is inherent with aluminum starts.
Superior aluminum performance.
Direct connection for optional XR™
push-pull guns or Spoolmatic®
spool gun. With Gun-On-Demand,
simply pull the trigger for the gun to
be used and you’re ready to weld.
Internal timers
Adjustable crater feature optimizes crater size
for steel, stainless, aluminum and metal-core
applications.
● Crater time delay allows
deactivation of crater feature for
tack or small welds.
●
Fan-On-Demand cooling only
operates when needed, reducing
power consumption and
contaminants inside the unit.
Industrial, 4-roll wire drive system
features two easy-to-set, scaled,
tension adjustments and quick-change
reversible drive rolls for .035 and
.045 in (0.9 and 1.2 mm) wire.
MIG Arc Welding Power Source,
Wire Feeder and Gun Package
Welds materials 22 gauge up
to 1/2 in (12.7 mm) thick.
Compatible with the
Millermatic® Reach
Wire Feeder. MIG Gun
sold separately. (See pg. 3
for more information.)
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
www.MillerWelds.com