عضویت 
ورود اعضا
راهنمای خرید
DS1036 Net2 Classic0 pages
DS1036
Net2 classic
System specifcations
Maximum total users/tokens
10,000
PIN Length
4-8
Number of codes
50
Code length
4-8
Number of time zones
64
Number of access levels
250
Stored events
2454
Data retention during
a total power loss
1 day
Handsfree compatible
Yes - requires interface
Clock and data
Yes
26 bit Wiegand
Yes
Custom Wiegand
Yes (Max 50 bits)
Silent operation
No
Door open time
1 sec - 999,999 secs
Electrical
Operating Voltage
10V - 14V DC
Current consumption
200mA
Relay switchable voltage
24V DC
Relay switchable current
4A
Alarm output current
1A
Communication
TCP/IP
No
Wireless
No
RS485
Yes
Hardware
Reader ports per ACU
2
Readers/Keypads per ACU
4 - check current draw on individual readers
Total ACU reader
port output current
Belden 9538
Reader cable type for extensions
Belden 9540
Network cable type
CAT5 or Belden 8723
As with all Net2 control units, Net2 classic is designed to work
seamlessly in the event of communications failure. It will continue to
permit or deny access to users as appropriate. Once communications
are re-established the activity is reported back to the PC.
Yes - if compatible
Reader cable type
The Net2 classic control units are connected using a dedicated
‘daisy chain’ RS485 network. They communicate with the server PC
via a USB or serial communications converter or across a computer
network using a Net2 plus control unit or an Ethernet interface. The
server PC can be connected at any point along the RS485 data line.
500mA
3rd party reader support
Net2 classic is a single door access control unit and can be networked
to others.
Other hardware features:
Features
Input for exit button
Yes
Input for door contact
Yes
Alarm/bell output
Yes
Environment
Operating temperature
0°C - +55°C
+32°F - +131°F
Moisture resistance
No - if used externally, it must be
protected in a weatherproof housing
Vandal Resistance
Low
•t
•t
•t
Volt free control relay
Input for PSU fail
Input for tamper
