DS1004 PROXIMITY Reader - KP50/KP75/KP75 screw connector0 pages

DS1004

PROXIMITY Reader - KP50/KP75/KP75 screw connector
System specifcations
Cable Length

5m/16ft
(Screw connector - None)

Cable type for extensions

Belden 9540

Maximum Cable extension length 100m/328ft
150m/500ft - USA
Token compatibility

Paxton
EM

Additional coloured covers available Yes
Handsfree compatible

Yes

Electrical
Operating Voltage

10V - 14V DC

Current consumption

180mA

Environment
Operating temperature

-35°C - +66°C
-31°F - +151°F

Moisture resistance

IPX7
(Screw connector- No)

Vandal Resistance

Medium

The KP50/KP75/KP75 Screw connector keypad readers are RFID/
Keypad combinations devices that offer the convenience of
contactless authentication, or the added security of PIN/Prox
entry, for system users.
They are available for use with both Switch2 and Net2 systems
The readers are supplied with a choice of black or white covers/
bezels. The reader is wired as shown on the control unit label.
The 75 Series variant is also optionally available with a screw
connector version making cabling even simpler.
Note: Be sure to avoid mounting proximity readers on metal
surfaces or near other proximity readers as this will affect the
read range.
A token is read by holding it within close proximity of the reader.
Once a token has been read the control unit looks up the access
permissions of that user. The control unit verifies the information
and grants or denies access as appropriate.
By default, all 3 LEDs are lit. If access is granted, the green LED
flashes. If access is denied, the red LED flashes.’ An audible tone
is emitted in both cases.