MICROCYLINDERS THREADED END COVERS0 pages

"

Microcylinders according to standard ISO 6432 Series 1200

nnnn

General

nnnn

Microcylinders are the most widespread linear actuators in common use due to their reduced dimensions. They can be applied

nnnn

in the most varied of sectors, from packaging to textiles, from woodworking machines to the ceramic sector and so on.

nnnn

Starting from these premises we have designed a light and sturdy component of pleasing appearance realized in three version:

nnnn

with threaded end covers, rolled end covers and rolled end covers with all components stainless steel.

nnnn

Threaded end covers version: hard anodized aluminium end covers, threaded into the anodized aluminium barrel. Bores

nnnn

from diameter 8 to 25mm. are made according to ISO 6432, while the diameters 32, 40 and 50 out of norms are produced to

nnnn

complete the range.

nnnn

Starting from this base, we have derived the special designs which we are describing herebelow:

nnnn

• single-acting with front or rear spring (max. stroke 40 mm; for longer strokes the length increase is not proportional to

nnnn

the stroke in order to provide lodging for the spring);

nnnn

• double and single-acting with flat bottom instead of clevis;

nnnn

• push-pull rod;

nnnn

• hexagonal non-rotating rod;

nnnn

• stainless steel rod on all versions;

nnnn

• THERBAN® seals on all versions for high temperature operations (120°C max);

nnnn

• microcylinders with magnetic piston (from 010 to 0 50)

nnnn

• stationary rubber cushions (standard);

nnnn

• adjustable cushions (from 016 to 050).

nnnn

"MIR", rolled end covers version: hard aluminium end covers, rolled on the AISI 304 stainless steel barrel, magnetic piston

nnnn

and standard AISI 303 piston rod on all versions. Also for these microcylinders, bores from diameter 8 to 25mm are made

nnnn

according to ISO 6432, while diameters 32 out of norms is completing the range.

nnnn

Starting from this base, we have derived the special designs which we are describing herebelow:

nnnn

• single-acting with front or rear spring (max. stroke 50 mm; for longer strokes the length increase is not

nnnn

proportional to the stroke in order to provide lodging for the spring);

nnnn

• double and single-acting with flat bottom instead of clevis;

nnnn

• push-pull rod;

nnnn

• chromed stainless steel piston rod, compulsory on piston rod locking version;

nnnn

• THERBAN® seals on all versions for high temperature operations (120°C max);

nnnn

• stationary rubber cushions (standard);

nnnn

• adjustable cushions (from 016 to 032).

nnnn

'MIR-INOX",stainless steel rolled end covers version: this version is very similar to previous one for technical and

nnnn

assembling characteristics, but all componenets are stainless steel.

nnnn

Bores from 016 to 025 are made according to ISO 6432 while diameter 32 out of norms is completing the range.

nnnn

The production of a stainless steeel cylinder is requested for particular working ambiences where resistance to hard chemicals

nnnn

conditions is necessary (zoothecnics, chemicals); at the same chemical neutrality must be guaranted (food industry, medicals).

nnnn

Main characteristics:

nnnn

•AISI 316 end covers

nnnn

•AISI 304 barrel

nnnn

•AISI304 mountings

nnnn

• Standard magnetic piston

nnnn

• NBR seals (except for piston rod seals which are in polyur.)

nnnn

• Stationary rubber cushions (standard)

nnnn

Available special designs:

nnnn

• Push-pull rod

nnnn

• VITON® seals (150°C max)

nnnn

• pneumatic progressive cushions (non adjustable)

nnnn

"TECHNOPOLYMER Microcylinders according to standard ISO 6432": Continuing in our commitment to the development

nnnn

and implementation of technologically advanced, competitive products we have introduced the 1230 series of technopolymer

nnnn

bodied microcylinders. This new cylinder complies with IS06432 and has operational characteristics similar to the Mir (1280)

nnnn

series cylinder with rolled end covers.

nnnn

One of the main features of this cylinder is the material of construction.

nnnn

In fact, the end covers and barrel are made from a technopolymer reinforced with glass fiber, giving mechanical qualities similar

nnnn

to those of aluminium.

nnnn

The use of technopolymer also allows the use of these cylinders in environments that are incompatible with aluminium.

nnnn

Bores available : 012 - 016 - 020 - 025.

nnnn

Products types:

nnnn

• Basic

nnnn

• Basic with magnetic piston

nnnn

Options:

nnnn

• Double acting

nnnn

• Double acting with flat rear end cover

nnnn

• Double acting through rod (Push/Pull)

"