Type 140/150 Power Feeds New Limit Switch Design0 pages

SERVO PRODUCTS COMPANY

Type 140/150 Power Feeds
New Limit Switch Design
Servo Products Company has created a new limit switch assembly for the Type 140 and Type
150 Power Feeds. These can also be used on the Type 80 and Type 100 units.* The new
design is now being shipped on all new units and parts orders. The illustration below shows the
new case, so you can tell if you have new or old limit switches.

What's different?
In the new assembly, the components are permanently potted in a molded plastic case. The
sealed and potted units are designed to resist coolants and oils found in manufacturing
environments.

Replacement and Part Numbers
The limit switch must now be replaced as a unit. You cannot replace component parts inside
the unit. The part numbers are as follows:
Type 140 and Type 80 units ......... #2023-10 (6 ft cord) ......... #2023-12 (8 ft cord)
Type 150 and Type 100 units ....... #2024-7 (6 ft cord)

For Repair Centers
The previous limit switch (Servo part #01241) was a Honeywell microswitch #41SM1-T2. Servo
Products Company no longer has these available. They may be available from Allied Electronics
and Newark Electronics. Other parts, such as the actuator #1557 and spring #6037, will
continue to be available from Servo until sold out.
*NOTE: As previously announced, Servo Products Company is no longer supporting Type 70
and Type 90 units.

For answers to questions or reference drawings
Contact your Servo dealer or Servo Sales Manager or
Servo Products Company Customer Service
Phone: 800-521-7359 or 440-942-9999 or Fax: 440-942-9100
Website: www.servoproductsco.com Email: info@servoproductsco.com

Form 0800-80889 07/28/05

SERVO Technical Bulletin