BINCEN Weighing Batching Controller FS3198 Series for batching plant,mixer batching system0 pages
Chongqing Bincheng Electrical&Mechanical Technology Co.,ltd www.cqbcjd.com
Bincen.rainbo@gmail.com
BINCEN·Weighing Batching System
Introduction
FS3198-C3x,C4x,C5x,C6x controllers have 3~6 weighing and batching channels, the batching system requires no PLC or computer control. These
weighing and batching controllers are made by our company which summarize the years experiences of electronic weighing scale in developing and
applying methods, adopt single chip MCU, low drift differential amplifier, high accuracy A/D, consecutive filter in quasi-stationary dynamic
weighing. The feeding channel control is running with automatic tare at first, and channel feeding control by net weight. It amends arriving advance
weight when each channel feeds in end, and feeds tinily repeatedly till weight qualified if less than qualified weight. The total weight is displayed till
all channels feeding end. The instruments use menus for batching administrator prescription input, work prescription input and advanced control
parameters input with password protection. The system control actuators may be tested directly by instrument panel at manual mode. They process
unload end control with small weight threshold and time delay. The weighing and batching control may be set up as times mode or continuous mode.
FS3198-C31,C41,C5,C6 use single speed feeding-in control. FS3198-C49 uses double speeds feeding-in control. The FS3198-C41,C49 four channels
batching meter has automatic vibrating control when channel feeding-in or scale unloading at running.
FS3198-C3~C6 weighing and batching controllers are used in batch scale or weighing batch, multichannel with quantitative control on the weighing
scale needed no PLC or industrial computer.
The system control actuators may be tested directly by instrument panel at manual mode. Under the manual mode, the automatic control logic is of no
effect, and you can use the numeric keys to test the work states of the relay-board’s outputs. This function is convenient for debugging and
maintenance of weighing control system.
Main features
• 1~8 pieces of analog loadcells of strain gauge type.
• static accuracy: OIML Ⅲ, n=3000
• dynamic accuracy: ±0.2~2% due to specific loadcells, actuators and material flow rate.
• adopt 7 figures, display 10LED, 24 keys to get intuitive and convenient operation, easy adjustment and maintenance.
• 3~6 kinds of materials , one or two feeding speed control.
• RS232 interface port printing results connecting serial port printer.
• running by times or continuously.
• control output is OC logic output or relays type.
• suitable for weighing and batching scale, gravimetric filling scale, quantitative filling scale, weighted threshold scale, etc.
• power source selectable : DC815V/12A,AC918V/12A,AC220V/50Hz/1530VA
Weighing&Batching Types and Main Functions Table (FS3198-C31,FS3198-C41, FS3198-C48FS3198-C49, FS3198-C52,FS3198-C62)
Type
Functions
Feeding channels
Channel’s speed
Amendment command
Tiny-feed command
Auto vibrate if jammed
Anload ctrl.
Auxiliary
custom-made
function
FS3198-C31
FS3198-C48
FS3198-C41
FS3198-C49
FS3198-C5
FS3198-C6
3
single speed
yes
yes
When
unloading
one
unload
a)auxiliary
timed feeding
b)timed mixing
c)Mixer’s timed
unload
4
single speed
yes
yes
4
single speed
yes
yes
when feeding
or unloading
L&R-unload,
or one unload
custom-made
for timed
mixing and
mixer scale’s
unload
4
double speeds
yes
yes
When feeding
or unloading
one
unload
5
single speed
yes
yes
6
single speed
yes
yes
no
no
L&R-unload
L&R-unload
no
one
unload
include
control of
scale hopper
moving up or
and down.
[Note] FS3198-C41 also has the type of selecting one channel to control from 4 feeding channels and with empty barrel recognition BY using empty
barrel weight threshold to prevent material to the ground.
Using Application Site
"