LOADING
صفحۀ لمسی
0.5 mm | ZYFILM / ZYPROFILM
چگونه این محصول را خریداری کنم؟
درخواست قیمت
درخواست مشاوره و مدارک فنی
پرسش
خدمات خرید VIP
شما می توانید از سرویس رایگان نمایشگاه استفاده نموده و درخواست خود را مستقیما به شرکت سازنده ارسال نمایید و پس از دریافت قیمت و با ورود اطلاعات به " ماشین محاسبه قیمت ریالی " از قیمت ریالی کالا بصورت تخمینی مطلع شوید . اگر مایلید مکاتبه با شرکت سازنده ، تبادل اطلاعات و دریافت قیمت ارزی و ریالی توسط کارشناسان این مجموعه انجام شود لطفا از این طریق اقدام فرمایید. استفاده از این سرویس مستلزم پرداخت هزینه است . برای دریافت اطلاعات بیشتر با تلفن 41995 تماس حاصل فرمایید.
ادامه
ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
افزودن به لیست علاقه مندی ها
سایر سازندگان این محصول
درخواست قیمت ریالی
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت Zytronic در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
مشخصات فنی
ZYFILM® and ZYPROFILM® are flexible film touch panels incorporating ZYTRONICs patented projected capacitive technology (PCT™). The touch panels are designed to be mounted to the rear surface of a rigid transparent substrate (such as glass or plastic), and operated by touching the substrates front surface.
Operation:
The associated electronic controller effectively divides the sensor into pixel-sized sensing cells, using an array of embedded microfine metal track electrodes, which are not ITO (Indium Tin Oxide) based, and are virtually invisible when in front of a powered display or rear projection film. These tracks are connected to the electronic controller board, and an oscillation frequency is established for each track. Using the theory of capacitance field effect, a touch on the overlay substrate to which the sensor is mounted causes a change in the oscillating frequency of the tracks around that particular point; the position of which is then determined by the driver software. Unlike conventional capacitive systems where the operator touches the actual conducting surface of the sensor, the active component of ZYFILM® / ZYPROFILM® is embedded within the sensor panel and protected by the mounting substrate.
The driver software allows the touch sensor panel to interface with the host computer’s operating system by emulating the behavior of a computer mouse, and translates touches into mouse movements and clicks.
Operation:
The associated electronic controller effectively divides the sensor into pixel-sized sensing cells, using an array of embedded microfine metal track electrodes, which are not ITO (Indium Tin Oxide) based, and are virtually invisible when in front of a powered display or rear projection film. These tracks are connected to the electronic controller board, and an oscillation frequency is established for each track. Using the theory of capacitance field effect, a touch on the overlay substrate to which the sensor is mounted causes a change in the oscillating frequency of the tracks around that particular point; the position of which is then determined by the driver software. Unlike conventional capacitive systems where the operator touches the actual conducting surface of the sensor, the active component of ZYFILM® / ZYPROFILM® is embedded within the sensor panel and protected by the mounting substrate.
The driver software allows the touch sensor panel to interface with the host computer’s operating system by emulating the behavior of a computer mouse, and translates touches into mouse movements and clicks.