LOADING
بوشینگ استیل ضد زنگ
چگونه این محصول را خریداری کنم؟
درخواست قیمت
درخواست مشاوره و مدارک فنی
پرسش
خدمات خرید VIP
شما می توانید از سرویس رایگان نمایشگاه استفاده نموده و درخواست خود را مستقیما به شرکت سازنده ارسال نمایید و پس از دریافت قیمت و با ورود اطلاعات به " ماشین محاسبه قیمت ریالی " از قیمت ریالی کالا بصورت تخمینی مطلع شوید . اگر مایلید مکاتبه با شرکت سازنده ، تبادل اطلاعات و دریافت قیمت ارزی و ریالی توسط کارشناسان این مجموعه انجام شود لطفا از این طریق اقدام فرمایید. استفاده از این سرویس مستلزم پرداخت هزینه است . برای دریافت اطلاعات بیشتر با تلفن 41995 تماس حاصل فرمایید.
ادامه
ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
افزودن به لیست علاقه مندی ها
سایر سازندگان این محصول
درخواست قیمت ریالی
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت Fritsche GmbH & Co. KG در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
مشخصات فنی
-
Material:
stainless steel
Our screw sleeve is compatible with hose stud and high pressure hose 840 bar of all notable manufacturers of centralised lubrication systems.
To get detailed information of our screw sleeve, please click the picture screw sleeve.
The screw sleeve is used as connecting piece to high-pressure hose 840 bars and a cutting-ring fitting or push-in connector. In order to connect a high-pressure hose 840 bars to a cutting-ring fitting or push-in connector, a screw sleeve is used together with a hose stud. Here, the screw sleeve is first screwed onto the high-pressure hose 840 bars. Then, the hose stud is fitted into the screw sleeve. The female thread of screw sleeve to be screwed onto the high-pressure hose is a left-hand thread in order to preclude any loosening of screw sleeve from high-pressure hose when mounting the hose stud. So, a sturdy, detachable and pressure-proof connection is obtained. This system enables the fitter of centralised lubrication systems to define the lengths of hose lines. These fittings have been conceived so that they can be mounted without special tools even outside a specialised workshop. Now, the end of hose stud can be fitted in a cutting-ring fitting or in a push-in fitting. Upon connection to a push-in connector, only one hose stud is used supporting this system. The relevant hose stud has then got a slot on the pipe to match the push-in connector. The hose stud is then pushed-in only for mounting. The screw sleeve can be delivered in sizes for high-pressure hoses of diameters 4.1 x 8.75 and 6.3 x 11.3 as well as in steel and VA 1.4571/316ti.
To get detailed information of our screw sleeve, please click the picture screw sleeve.
The screw sleeve is used as connecting piece to high-pressure hose 840 bars and a cutting-ring fitting or push-in connector. In order to connect a high-pressure hose 840 bars to a cutting-ring fitting or push-in connector, a screw sleeve is used together with a hose stud. Here, the screw sleeve is first screwed onto the high-pressure hose 840 bars. Then, the hose stud is fitted into the screw sleeve. The female thread of screw sleeve to be screwed onto the high-pressure hose is a left-hand thread in order to preclude any loosening of screw sleeve from high-pressure hose when mounting the hose stud. So, a sturdy, detachable and pressure-proof connection is obtained. This system enables the fitter of centralised lubrication systems to define the lengths of hose lines. These fittings have been conceived so that they can be mounted without special tools even outside a specialised workshop. Now, the end of hose stud can be fitted in a cutting-ring fitting or in a push-in fitting. Upon connection to a push-in connector, only one hose stud is used supporting this system. The relevant hose stud has then got a slot on the pipe to match the push-in connector. The hose stud is then pushed-in only for mounting. The screw sleeve can be delivered in sizes for high-pressure hoses of diameters 4.1 x 8.75 and 6.3 x 11.3 as well as in steel and VA 1.4571/316ti.