Model MV-2 and MV-2L Micro Sandblasters®0 pages
Model MV-2 and MV-2L
Micro Sandblasters
The SWAM-BLAST® Micro Sandblasters introduce a precise amount of finely graded abrasive
powder into a controlled stream of compressed air through the abrasive pathway and out a manually
or automatically positioned nozzle tip.
Total process control can be achieved with
independently adjustable powder flow control and
air pressure regulation. When detail is required, the
powder flow is turned down to reduce the amount of
the powder being vibrated into the abrasive/air
pathway thus allowing the use of very small nozzle
tips. For more aggressive requirements, the air
pressure, powder flow and the nozzle tip diameter
can be increased. An assortment of nozzle styles and
sizes, a wide variety of powder types and particle
sizes, and interchangeable orifice plates are available
to accomplish various applications.
The unique design of the Model MV-2 and
MV-2L offers “Maximum Versatility”. Front and
back panels unlatch to easily access components and
carbide lined fittings throughout the abrasive/air
pathway for routine maintenance. The powder tank is mounted to a hinged plate that allows it to tilt
to the side and with the push of a button, the vibrator activates to simply walk the powder out for
rapid powder changes.
The Model MV-2 works very well with a nozzle range from .007” up
to .040”. For more aggressive applications that require a larger nozzle
range, the Model MV-2L is suitable for nozzle sizes .018” up to .060”.
CRYSTAL MARK, INC. offers additional options for the Model MV-2
and MV-2L as well as work chambers, dust collectors and air dryers in
various sizes and configurations to meet your specific requirements.
Tilt Tank for quick powder changes
Job Shop Services Available
Power Requirements
Air Requirements
Weight
Size
115 VAC, 60 Hz, 1 amp
230 VAC, 50 Hz, 1 amp
40 psi (276 kPa) minimum
140 psi (956 kPa) maximum
43 pounds (20 kg)
13”Wx11”D x 13”H
CRYSTAL MARK, INC.
A SWAN TECHNOLOGIES CORPORATION
613 Justin Avenue Glendale, California 91201-2396
(818)240-7520 (800)659-7926 FAX (818)247-3574
www.crystalmarkinc.com sales@crystalmarkinc.com
©2001 Crystal Mark, Inc. ALL RIGHTS RESERVED. SWAM and SWAM BLAST are registered trademarks of Crystal Mark, Inc.
"