Flexicarb SR0 pages
FLEXICARB
RGS 4
FLEXITALLIC LIMITED
PO BOX 3 MARSH WORKS DEWSBURY ROAD
CLECKHEATON WEST YORKSHIRE BD19 5BT
TEL: 01274 851273
FAX: 01274 851386
PRODUCT
REFERENCE:
FLEXICARB RGS 4
DESCRIPTION:
RGS 4 is a high purity graphite laminate reinforced with a flat stainless steel
core.
SERVICE:
FLEXICARB RGS 4 is recommended for high temperature, high pressure sealing
applications. The inclusion of the steel reinforcing core gives rise to a robust
sheet with excellent handling characteristics. RGS 4 can be used to seal a wide
range of media, with the exception of strong oxidising agents, at extremes of
temperature and pressure. The soft conformable nature of the graphite facing
material makes RGS 4 suitable for sealing between worn or pitted flanges. Typical
industries where RGS 4 is used include power generation and petrochemical.
Maximum recommended temperature :
Oxidising media 370OC (700OF)
Inert or reducing media 700oC (1290oF)
Maximum recommended pressure :
15 MPa (150 bar; 2200 psi)
Note : For applications sealing inert or reducing media, at temperatures in excess
of 370OC, attention must be given to the possibility of oxidative attack on the
gasket from the external environment.
Use with strong oxidising agents should be avoided.
For long term continuous use in oxidising environments at temperatures in excess
of 370OC please consult Flexitallic Applications Engineering Department.
CONSTRUCTION :
Facing material :
98 % pure graphite foil.
Reinforcement :
0.05 mm thick flat stainless steel (AISI 316 grade).
TYPICAL PHYSICAL PROPERTIES:
Thickness
1.5 mm
Density
ASTM Compressibility
ASTM Recovery
BS Residual Stress
ASTM Tensile Strength
Leachable Chloride Ion Content
Leachable Fluoride Ion Content
gcm-3
%
%
MPa
MPa
ppm
ppm
1.2
40
20
32
20
<50
<50
AVAILABILITY:
Sheet size :
1.0 m x 1.0 m & 1.5 m x 1.5 m
Thickness range :
0.75 mm to 3.0 mm
PDS 360 09/05
This Data Sheet refers to the material as supplied. The information contained herein is given in good faith, but no liability
will be accepted by the Company in relation to same.
We reserve the right to change the details given on this Data Sheet as additional information is acquired.
Customers requiring the latest version of this Data Sheet should contact our Applications Engineering Department.
The information given and, in particular, any parameters, should be used for guidance purposes only. The Company does
not give any warranty that the product will be suitable for the use intended by the customer.