Compressed Fiber SF 24010 pages
VOUR GLOBAL GASKET
nnnnPROVIDER
nnnnDATA / SPECIFICATION SHEET
nnnnSF 2401
nnnnColor - Green
nnnnDESCRIPTION
nnnnFlexitallic SF 2401 is a medium quality cost effective com-
nnnnpressed non-asbestos sheet material based on a blend of
nnnnaramid and inorganic fiber with a high quality nitrile binder
nnnnsystem.
nnnnTYPICAL PHYSICAL PROPERTIES
nnnnSERVICE
nnnnSF 2401 is a general purpose material suitable for use with
nnnnoils, solvents, gases, hot and cold water, low pressure steam
nnnnand many dilute acids and alkalis.
nnnnThe operating temperature for non-asbestos sheet material is
nnnnrelated to the thickness of the materials selected. Thinner
nnnnmaterials offer better temperature and pressure properties.
nnnnAVAILABILITY
nnnnThickness range = 1/64" to 1/8" (0.4 mm to 3.0 mm)
nnnnStandard sheet sizes =
nnnn80" x 80" (2.0 m x 2.0 m)
nnnn80" x 60" (2.0 m x 1.5 m)
nnnn80" x 40" (2.0 m x 1.0 m)
nnnn60" x 120" ( 1.5 m x 3 m)
nnnn60" x 60" (1.5 m x 1.5 m)
nnnn60" x 40" (1.5 m x 1.0 m)
nnnnStandard roll sizes = Up to a maximum size of 236" x 80"
nnnn(6.0 m x 2.0 m)
nnnnCan also be supplied with anti-stick coating and graphite
nnnncoating.
nnnnThickness | 1/16" (1.5 mm) | |
Density | 125 lb/ft3 (2.0 g/cc) | |
Tensile Strength | ASTM F152 | 1160 psi (8 MPa) |
Compression | ASTM F36 | >6% |
Recovery | ASTM F36 | 50% min |
Residual Stress | DIN 52913 (175°C) BS 75311 | 2180 psi (15 MPa) 7250 (50 MPa) |
Gas Leakage | BS 7531 | <1.0 mL/min (<1.0 cc/min) |
ASTM Oil 1 | Thickness Increase | 1.0% |
ASTM Oil 3 | Thickness Increase | 4.0% |
ASTM Fuel B | Thickness Increase | 4.0% |
SF 2401
nnnnPressure/Temperature Limits
nnnn0 122 212 302 392 482 572 662 752 842
nnnn(50) (100) (150) (200) (250) (300) (350) (400) (450)
nnnnTemperature, °F (°C)
nnnnQ Suitable subject to chemical compatibility
nnnnA Suitable in some cases but check your application requirements with
nnnnFlexitallic
nnnnQ Contact the Flexitallic Technical Team for applications with higher
nnnntemperatures and pressures. Applicable to 60" (1.5 mm) and below.
nnnnThe operating temperature of non-asbestos sheet material is related to
nnnnthe thickness of materials selected. Thinner materials give better tem-
nnnnperature and pressure properties.
nnnnThis Data Sheet relates to the material as supplied. The information contained herein is given in good faith, but no liability will be accepted by the Company in relation to same. The acquisition of additional information may necessitate revisions to parts or all
nnnnof this Data Sheet, and such information will be supplied as it becomes available
nnnnAs the Company's products are used for a multiplicity of purposes, and as the Company has no control over the method of their application or use, the Company excludes all conditions or warranties, express or implied, by statute or otherwise, as to their prod-
nnnnucts and/or their fitness for any particular purpose. Any technical co-operation between the Company and the Customer is given for the Customer's assistance only and without liability on the part of the Company
nnnnFlexitallic LP. • 6915 Highway 225 • Deer Park, Texas 77536 USA • Tel: +1 281 604 2400 • www.flexitallic.com
"