SP210-H / SP210-H/W0 pages

Embracing Challenge

Gas Sample Probe Series SP®
Electrically heated, compact version SP210-H / SP210-H/W

SP210-H

Special Features
Sampling of dust loaded process gases

S
mall volume, fast response time
Easy mounting and maintenance

S
elf-regulated electrical heater

Application
The M&C gas sample probes version SP210-H
and SP210-H/W are applicable for continuous
gas sampling.The compact design requires
only limited space.
The gas sample probe SP210-H/W is
equipped with an extra protective cover
preferably for outdoor mounting.

The maximum operating temperature of the
tube out of stainless steel is 600 °C.
In case to avoid cooling and condensation of
the sample in the insitu tube from the sample
point to the heated sample probe the SP
30-H or SP 35-H heated sampling tubes can
be used.

Alarm contact for low temperature
Outdoor mounting with protective cover
Insitu probe tube optional

Description
The design of the M&C probes version
SP210-H and SP210-H/W guarantees simple
mounting, safe operation and problem-free
maintenance.
Changing the external filter element needs
no tools and no disassembling of the sample
line. The complete filter assembly is removed
out of the probe head. This simplifies the
checkup of the filter element and the gaskets.
The filter area of the probe head respectively the insitu probe tube can be cleaned
very easely without dismounting the sample
probe. The large external filter element of
ceramic with 2µm porosity is heated up with
the stainless steel probe head to constant
180 °C, using a special selfregulated heating
element. This avaoids dew point problems at
the probe flange and filter area. A heat insulation covers all sides of the probe and ensures
an optimized heat distribution as well as safe
operation.
The power supply of the probe can be in
a range between 110V and 240V without
switching. No thermostat or temperature limiter are necessary.
The separate thermo switch enables a low
tem-perature monitoring (<160 °C, NO). For
electrical connection a junction box with
terminals is mounted.
The gas sample probe SP210-H/W equipped
with a protective cover with quick clamps is
recommended for outdoor-mounting.
The stainless steel insitu probe tube SP210/
SS (option) is screwed into the DN65 PN6
mounting flange.

Technical specifications and illustrations are without
obligation, subject to modifications. 10.04/06.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

2.7