winder series W2000 horizontal sliding winders0 pages
e x trusion
100 %
WINDING TECHNOLOGY
SERIES W2000 HORIZONTAL SLIDING WINDERS
Series W2000 horizontal sliding winders
for the most challanging tasks
The winders series W2000 are horizontal sliding
winders. They operate individually moveable winding
stations, thus having no free web length at roll change
and not producing “indexing scrap” as turret winders
do. These winders are preferably used in cast lm lines
and extrusion coating lines. They are equipped with
different cutting units according to their nal application.
Basically 3 models are available:
The winder W2000 robotic is used for packaging/
lamination lms like CPP, CPE lms and barrier lms.
Due to its strong guillotine cutting knife it is also
suitable for laminated structures in the coatings industry.
The winder W2000 aerolm is used for the production
of hygiene lms, which can be slit inline. Cross cutting
is done by means of a twisting knife. Roll diameters up
to 1000mm are possible.
The winder W2000 stretch wrap features a driven
contact roll, an air nozzle start up basket, a guillotine
cutting unit, an automated roll handling and a core
feeding device. It is optimised for stretch lm, allowing
for a short cycle time of 70 seconds and on the other
hand offering 3-inch jumbo rolls up to 450mm
diameter.
Winders series W2000 are known for their solid and
versatile design. Depending on the eld of use, they are
operated at speeds from a few meters to 750 m/min. For
such high line speeds, the winders also include a built-in
anti-vibration system. Any vibrations that do arise are
deected to the side walls by means of steel anchoring
rods, where they are dampened down into polymer
concrete. Sensitive web tension control is guaranteed
by an ultra-light carbon-bre dancer roller system.
Web tension is controlled in the speed control mode
making it independent from both motor size and bobbin
diameter. A satellite system optimises the angle between
the wound bobbin and the incoming web, which in
return minimises the trapping of air.
Winders series W2000 have large 15-inch TFT colour
operating screens. The PLC offers individually adjustable
winding taper curves for various products. The error
diagnostics tools and a modem connection ensure
easy servicing and troubleshooting.
www.sml.at
SML MASCHINENGESELLSCHAFT MBH
SML-00011_Produktbl_WIND.indd 9
BUNDESSTRASSE 1A
A-4860 LENZING
AUSTRIA - EUROPE
PHONE: +43 7672 912 0
FAX: +43 7672 912 9
EMAIL: SML@SML.AT
21.10.2010 11:19:56 Uhr
"