Pulsarlube M Service Pack Replacement Guide0 pages
Deaeration & Quality Control
Every grease pouch is accurately filled and then put through the deaeration process. This process utilizes centrifugal force to
virtually eliminate small pockets of air entrapped in the grease pouch for both cosmetic and functional purposes. Entrapped air
may result in an air lock in the pump of the Pulsarlube M lubricator, leading to possible unit malfunction due to priming issues.
The volume of grease is carefully adjusted for each batch; therefore the weight of the product may vary based on the specific
weight of each individual grease type.
USER MANUAL
Replaceable Service Pack for PULSARLUBE M, EX, MS, MSP, M500 and ML500
Keep Service Pack stored in a cool and dark place.
Battery Selection Guide
All electromechanical Pulsarlube products are designed to use a full capacity of Standard Battery Pack for each lubrication
cycle set regardless of the length of period. For specific application, however, an optional Lithium Battery Pack should be
used such as: extremely cold temperature, high backpressure, or multi point lubrication with use of divider block (upto 8 points).
Refer to following guideline for selecting battery pack. If further information is required, please contact your local supplier or
manufacturer.
Battery Type
Selection
Parameters
60, 125, 250cc Model
Standard
-15℃~60℃
(-5℉~140℉)
Optional
-40℃~60℃
(-40℉~140℉)
ㆍLower than -15℃/-5℉
500cc Model
ㆍ30kgf/㎠(425psi) or less
(DC 4.5V Alkaline)
(DC 4.5V Lithium)
Models
Selection Parameters
Operating
Temperature Range
ㆍ20kgf/㎠(280psi) or less
ㆍOver 20kgf/㎠(280psi)
ㆍDivider block (1~8 points)
ㆍDispensing period over 18 months
Shelf Life and Warranty Period
The shelf life of The Service Pack is 2 years from the date of manufacturing. The warranty period is 1 year from the date of purchase.
Product warranty is limited to original defects in material and workmanship and will not cover any collateral damage due to mishandling,
abuse and / or any other inappropriate use of this product.
How to Order
Pulsarlube Standard Lubricants
Grease Code
Application
PL1
Multi Purpose
PL2
Heavy Duty
PL3
High Speed
PL4
H1 Food Grade
PL5
High Temperature
PL6
Multi Purpose With MoS2
PL7
Low Temperature
SV
/PL
-B001/LB001
Before Use
Thank you for purchasing the Replaceable Service Pack for PULSARLUBE M, EX, MS, MSP, M500 & ML500 from
Pulsarlube USA, Inc. To ensure the safe operation and proper installation of the Service Pack, we strongly recommend
that you read the following information carefully before use. If you require further information, please contact your local
supplier or manufacturer.
Components
60, 125, 250, or 500
PL
B001
LB001
PL1, 2, 3 ... 6, 7 or OEM
Standard Battery
Lithium Battery
Example 1) SV250 / PL1 - B001
250cc, PL1 type grease filled with Standard Battery Pack
Example 2) SV125 / PL4 - LB001
125cc, Food grade grease filled with Optional Lithium Battery Pack
Pulsarlube USA, Inc.
4312 DiPaolo Center, Glenview, IL 60025, USA
TEL: 1-847-795-0591
FAX: 1-847-795-0119
Replaceable Service Pack
SV60 series
60cc for Pulsarlube M, EX, MS, MSP
SV125 series 125cc for Pulsarlube M, EX, MS, MSP
SV250 series 250cc for Pulsarlube M, EX, MS, MSP
SV500 series 500cc for Pulsarlube M500 & ML500
www.pulsarlube.com / info@pulsarlube.com
Doc No. 1112-000 REV. 120100
60cc
125cc
250cc
500cc
Each Replaceable Service Pack consists of:
• A Grease Pouch of the selected lubricant type in 60, 125, 250, or 500cc volumes
• A Standard Battery Pack (DC 4.5V Alkaline) or an Optional DC 4.5V Lithium Battery Pack
• A Disposable Dust Cover
The Replaceable Service Pack is supplied as a single kit and comes in boxes of 10 (for 60, 125, 250, and 500cc)