EPT002 Evaluation and Programming Tool0 pages
EPT002
Evaluation and Programming Tool
for POSIC Encoder Kits
Product data
Operation without PC
The Interface Board is operated without PC by connecting
the USB-cable to a mains-to-USB converter, Fig. 3. Start or
stop the encoder by pressing the “Start/Stop” button.
Contents
2 Encoders
USB cable
Enclosure
Encoder signals
Codewheel
or linear scale
Interface Board
Start/Stop button
Fig. 3: The Interface Board operated without PC
Fig. 1: Evaluation Tool (left) and Programming Tool (right).
Operation with PC
The Evaluation Tool contains either a codewheel with 64
periods and outer diameter 28.2 mm or a 2-track linear
scale of 100 mm length with a centered index. Both targets
fit in the white plastic target holder.
The Interface Board is operated with a PC using the USB
cable and the ASSIST software.
Interface Board
The board contains several LEDs as listed below:
- PWR (red): Interface Board powered via USB
- ENC (red): Encoder active
- SYSTEM (red): Microcontroller active
- PROG (yellow): Programming of OTP (One Time
Programmable) memory is ongoing
- Signal LEDs (red): encoder output signals
The encoder signals are visualized by the signal LEDs and
can be measured on the TestPins and the Terminal Block.
PWR LED
ENC LED
POSIC
Encoder
SYSTEM LED
PROG LED
Reference
Encoder
Fig. 4: The Interface Board operated with PC
USB
Software
Signal LEDs
The ASSIST software allows you to configure, evaluate
and linearize POSIC encoder kits. These three functions
are available in three windows as explained below.
Start/Stop button
Reset button
Terminal block
Signal TestPins
Microcontroller
Ground connection
Target holder
Linear scale
Fig. 2: The Interface Board
EPT002-PB-V2A
Configuration
The configuration window allows you to:
• Choose between rotary and linear measurement
• Define the resolution of the reference encoder
• Define the codewheel or scale of the POSIC encoder
• Select the resolution of the POSIC encoder
• Select the LookUp Table
• Define 3 encoder identification numbers
Page 1 of 2
www.posic.com
"