Hydraulic Ground Rod Driver0 pages

GD50

GROUND ROD DRIVER
SPECIFICATIONS
ITEM

U.S.A.

METRIC

CAPACITY (GD50132RF)

1/2 and 5/8 in. Rod

12 and 16 mm Rod

CAPACITY (GD50133RF)

3/4 and 1 in. Rod

FLOW RANGE
PRESSURE

19 and 25 mm Rod 19 -

5 - 9 gpm 1500 -

34 lpm

2000 psi

105 - 140 bar

-8 SAE Straight Thread O-Ring

PORTS

Open Center/Closed Center

SYSTEM TYPE
WEIGHT

52 lbs

24 kg

LENGTH

25.5 in.

64.8 mm

CONNECTION

3/8 in. Flush-Face Quick Disconnect Couplers

HOSE WHIPS

Yes

Features and Benefits
The Stanley GD50 Ground Rod
Driver is ideal for driving rods with
proven, hard-hitting technology.
Two models are available, the
GD50132RF that drives 1/2-inch
and 5/8-inch rods and the
GD50133RF that drives 3/4-inch
and 1-inch rods.
The lifting eye allows the operator
to suspend the driver above the
rod with ease. The long side
handles give the operator control
during the driving process.
The in-line valve in the 8-foot hose
whips gives the operator On/Off
control where he is standing.

Both GD50 models have driving
anvils which are designed to fit the
rods which helps to minimize
damage to the rod ends. The anvil
which remains in contact with the
rod while the hammer in the
ground rod driver delivers its highenergy blows to the anvil. The
deep socket of the anvil keeps the
driver from jumping off the end of
the rod.
The anvils are interchangeable, so
that you can change the capacity
of a ground rod driver by simply
changing anvils. The removal of
two bolts is all that is required to
service the front end of the GD50.

Stanley Hydraulic Tools | 3810 SE Naef Road | Milwaukie, Oregon 97267 | +01.503.659.5660 | 800.972.2647 | www.stanleyhydraulic.com