Drill0 pages

Drill
Features and Benefits
The Stanley DL07 Drill is ideal for
drilling holes in wood, metal and
masonry. It features the Stanley
Hyrevz™ gear-type motor. It also
features instant reverse for high
reliability and efficiency in all types of
drilling applications.
Dual-position Assist Handle on some
models provides increased control and
performance on tough drilling jobs.
The oversized feathering trigger and
its insulated handle coating provides
better control of drill speed and
increased operator comfort, better grip
and reduced operator fatigue.
The new over-sized reversing spool is
protected by heavy-duty wiper seals.
These wiper seals clean away dirt as the
spool is moved. Dirt cannot get in between
the spool and housing bore to create
leak-causing scratches. A clean
spool always runs in the housing; the
dirt is left outside.
SPECIFICATIONS
DL07-122003 Stanley Hydraulic Tools
3810 S.E. Naef Road
Milwaukie, Oregon 97267
Tel 503•659•5660
Fax 503•652•1780
ITEM U.S.A. METRIC
CAPACITY 1/2 in. Chuck 12 mm Chuck
PERFORMANCE See Table Below
FLOW RANGE See Table Below
MAXIMUM FLOW 12 gpm 45 lpm
PRESSURE 2000 psi Max 140 bar Max
PORTS -8 SAE O-Ring
WEIGHT 6 lbs 2.7 kg
LENGTH 9 in. 22.90 cm
CONNECTION See Ordering Information
MOTOR Stanley Hyrevz™ Gear
SYSTEM TYPE Open Center/Closed Center
DL07
Visit our website at www.stanley-hydraulic-tools.com
The built-in reverse-check valve prevents
operating the wrench when reverseplumbed
to the hydraulic system. Preventing
reverse operation ensures a long
operating life for the hydraulic seals.
Coated with a thick, tough layer of
foamed-plastisol, the handle transmits
very little heat. The foamed plastisol
gives a more comfortable grip to the tool.
The forward position of the handle places
more of the tool weight on your hand for
better balance and control.
The cast-in lifting eye is always available,
unlike screwed-in lifting rings which may
come loose and fall off.
The Stanley dual-spool selector is
accessable under a seal plug at the rear
of the tool. Setting the tool for open or
closed-center operation is as simple as
opening or closing a valve. The selector
is not susceptible to moving under the
vibration of use and is completely protected
from accidental or unintentional
TORQUE
U.S.A METRIC
4 ft lb @ 500 psi .5 Nm@35 bar
9 ft lb @ 1000 psi 1.2 Nm @ 70 bar
14 ft lb @ 1500 psi 1.9 Nm @ 105 bar
19 ft Lb @ 2000 psi 2.6 Nm @140 bar
DRILL SPEED/HYDRAULIC FLOW
350 rpm @ 3gpm 11.3 lpm
475 rpm @ 4 gpm 15 lpm
750 rpm @ 6 gpm 23 lpm
1000 rpm @ 8 gpm 30 lpm
1250 rpm @ 10 gpm 38 lpm
DL09 TORQUE AND DRILL SPEEDS
access. The seal plug also protects the
end of the trigger spool and dual-spool
selector from water and dirt.