عضویت 
ورود اعضا
راهنمای خرید
single column vertical lathe CX51200 pages
Single Column Vertical Lathe C5120/CX5120
MAIN USE
This series machine is single column vertical
lathe, it has a railhead and a sidehead. it's suitable
of the ferrous, nonlerrous metal and some kinds Ol
non-metal materials with hard alloy, high capability
and high speed steel tools. It can perform finely and
roughly turning cylinder and inner hole, inner and
outer taper, grooving, drilling, tapping and reaming
Technical specification of C5120/CX5I20
The form ot knife sets:
Ram'Turret (alternatively)
Max.turning diameter(mm) | 2000 | Travel of railhead Horizontal (mm) | 1050 |
Table diameter(mm) | 1800 | Travel of railhead Vertical(mm) | Turret 800 Ram 1000 |
Max.weight of workpiece(t) | e | Travel of sidehead Horizontal (mm) | 630 |
Speed range of tabie(r/min) | 4-125 | Travel of sidohead Vertical (mm) | 1150 |
Speed-step of table | 16 | Moving degrees limit ol railhead | ±30* |
Power of main motor(kw) | 30 | Feed range of tool post (mm/min) | 0.8-86 I2steps |
Max. working height of workpiece(mm) | 1200/1400 | Rapid traveling speed of tool post(mm/min) | 1800 |
Max. cutting resistance of railhoad(KN) | 25 | Weight of machine(About t) | 15 |
Max. cutting resistance ofsidehead(KN) | 20 | Sectional size of tool bar(mm) | 30x40 |
Max. torque of table<KN) 32 | Overalldtmensions(L>W*H) 3100x2800x3010(3210) (mm) | ||
Note:Technical specifications are sub)ect to change withoul notice. Special orders will be according to the contract. The lathe CX5120 is equipped with a digital display device. | |||
