عضویت 
ورود اعضا
راهنمای خرید
single column vertical lathe CX5170 pages
Single Column Vertical I.alhe C517/CX517
MAIN USE
This series machine is single column vertical
lathe, h is suitable of turning surlace.inner
hole, excircle.inner and outer taper of many
hinds of small and medium-sized ring units,shells
and flange plates.drilling.roaming and boring.
Technical specification of C517/CX517
Max.turning diameter (mm) | 700 | Speed range of tabie(r/min) (I6steps) | 10-315 |
Table diameter (mm) | 600 | Feed range of railhead {mm/min ( | 0.8 -86 l2stops |
Max.working height of workpiece (mm) | 7CD | Rapid traveling speed ot tool post (m/min) | 1800 |
Max.weight of workpiece(t) | 1.2 | Max.travel of crossbeam (mm) | 420 |
Max.cutting resistance(KN) | 20 | Moving degrees limit of tool post (degree) | 130- |
Max.torquo(KN.m) | 10 | Sectional size of tool bar(W x H)(mm) | 30x40 |
Travel of railhead Horizontal(mm) | 420 | Power ot teed motor ( kw ) | 1.3/1.8 |
Travel of railhead Vertical(mm) | Ron | Weight of machine (About 1) | 5 |
Power ot main motor(kw) | IS | ||
Overall dimensions)!. >c Wx H)(mm> | 2300x2050x2660(mm) | ||
Note: The lathe is without sidehead as standard. Technical specifications are sub)ect to change whithout notice .Special orders will be according to the coniract .The laihe CX517 is equipped with a digital display device. | |||
