Embedded System Access - A Technology Leader0 pages
JTAG/Boundary Scan
JTAG/Boundary Scan
Software IP-based Technology from GOEPEL electronic
IP Technology for Chip-embedded Instruments and I/O Modules
Software Recongurable Instruments
ChipVORX® Technology
detected this problem early on and pursued the approach known as
„Software Recongurable Instruments“. This aims to dynamically
adapt hardware and software tools to the actual target mission by means
of appropriate IPs. The system is essentially based on the following
technologies:
•
•
•
•
•
Altera
Cyclone
SYSTEM CASCON™ – software platform
SCANFLEX® – hardware platform
VarioTAP® – processor IP
ChipVORX® – instrument IP
VarioCore® – I/O module IP
External & Embedded
Instruments
Technology
Processor
Emulation Test
SYSTEM CASCON
Processor Emulation Test
Embedded Diagnostics Test
Integration of IP technologies into SYSTEM CASCON™
-
-
Advanced VarioTAP
ARM
-
Atmel
*limited to the simplest instruments
USB
USB / LAN
IP Link
Freescale
Intel
10
Picochip
Renesas
TI
Boundary Scan
Flash Programming
0.1
Embedded Flash
External Flash
ChipVORX® drives ash-ISP performance
SFX5350
VarioTAP® Technology
Example of the functional principle of VarioTAP
®
VarioTAP is a revolutionary technology for the fusion of Boundary Scan
and processor emulation. It uses VarioTAP models to adapt platform
modules to the target processor. The models are modularly dened as
intelligent software IP and basically offer a multi-level functional structure.
Test Coverage
At-Speed Functional Test
Gigabit Connections
Dynamic Memory Access
Highly comple
Boundary Scan + VarioTAP
®
Boundary Scan
<<
SCANFLEX Bus
In principle it is possible – in combination with SCANFLEX hardware,
which is also adapted dynamically through software to the corresponding
debugging interface (JTAG, BDM, SBW, SWD, COP, etc.) – to support
all contemporary processors and micro controllers. The same applies to
multi-processor and multi-core designs. This makes VarioTAP the leading
Processor Emulation Technology available on the market.
>>
SFX6216
SFX9305
IP Link
SFX5364
SFX6308
SFX5396
<< PXI Bus >>
• core-assisted ash programming / PLD programming
• bus emulation test / system emulation test
• Embedded Diagnostics Test (EDT)
Infrastructure
Interconnections
Static Memory Acess
Complex Clusters
I/O Bus
FPGA-loaded instruments (soft macros)
IP vendor proprietary instruments (hard macros)
standardised instruments access (IJTAG macros)
custom-designed instruments (ASIC hard macro)
IC-centered ChipVORX models are functional software IPs with a modular architecture.
This openness serves to simultaneously support several embedded instruments. The same
applies if the instruments are embedded in different chips. FPGA-based instruments are
particularly signicant, because they enable extremely exible applications. In this case,
too, ChipVORX offers an excellent solution, because it supports ESA technologies such as
FPGA-Assisted Test (FAT) and FPGA-Assisted Programming (FAP); at the same time,
it is able to handle soft macros and the required loading into the target FPGA. This means
that ChipVORX models for FPGA are not only able to access and control instruments, they
can also contain such instruments. This type of ChipVORX model focuses on applications
such as:
•
•
•
•
high-speed ash In-System Programming
high-speed access test of DDR-SDRAM
universal frequency and clock measurements
bit error rate test (BERT)
VarioCore is a revolutionary technology for the reconguration of I/O modules. These
modules include:
• SCANFLEX I/O modules (digital/mixed signal)
• PXI I/O modules (digital)
VarioCore IPs, which dynamically adjust the functional scope of a module to the appropriate
test task, serve as their basis. In doing so, the VarioCore IPs can be activated in sequence
and can be immediately accessed and controlled, i.e. without having to reinitialise the
platform. The available functions include:
•
•
•
•
counter/frequency measurement IP
vector generator/recorder IP
digitiser/bus emulator IP
customer-specic IP
Get the total Coverage!
Principle of VarioCore®
GOEPEL electronic GmbH
Authorised Distributor:
Goeschwitzer Straße 58 / 60
07745 Jena / Germany
Phone: + 49 (0) - 36 41 - 68 96 - 0
Fax:
i
A Technology Leader
The interaction between VarioCore®, ChipVORX® and VarioTAP® on a single
platform provides superior exibility in any dimension – Get the total Coverage!
Project Progress
Improvement of fault coverage by VarioTAP®
Embedded System Access
VarioCore® Technology
Standard VarioTAP
Moreover, the overall solution also enables deep interaction with many
conventional access technologies such as In-Circuit Testing, Flying
Probe Testing and Functional Testing. Further information in this regard
is available at goepel.com/en/products and goepel.com/en/
integration. The specic IP-based technologies are described in more
detail below.
NXP
FPGA
Accelerated
Flash
Programmer
Flash Programming
Altera
ChipVORX
Flash Programming
10
-
FPGA-Assisted Programming
FPGA
100
-
-
Core-Assisted Programming
Hardmakro
*
In-System Programming
Softmakro
Test Access Port
-
-
Chip-embedded Instruments
•
•
•
•
ChipVORX® controllers for soft and hard macros
ChipVORX
-
Boundary Scan Test
Flash / PLD / MCU
Programming
VarioTAP
Flash Size (MB)
Platform Nucleus
Xilinx
Virtix
JTAG
By integrating the IP-based technologies into SYSTEM CASCON, the
original boundary scan tool suite was developed into an open software/
hardware-related platform that supports all ESA strategies.
Boundary Scan
Test
Xilinx
Spartan
IP Link
Test Access Port
Debugger
Visualiser
Altera
Stratix
Lattice
ECP2
USB
USB
Altera
Arria
Thanks to innovative ChipVORX technology, it was possible to combine Boundary Scan
and Chip-embedded Instruments for the rst time. ChipVORX models are used to
adapt software tools to the target instruments. As a result, the technology is completely
open for any type of instrument.
ASSP
There is no doubt that the growing number of ESA technologies
are making possible a continuous improvement in the control problems
prevalent while testing, programming and validating state-of-the-art
electronics at chip, board, and system level. In contrast, vendors of proper
testing equipment are facing a severe challenge. GOEPEL electronic
+ 49 (0) - 36 41 - 68 96 - 944
E-Mail: sales@goepel.com
Further Informationen Embedded System Access as well as
Weitere information on zu Embedded System Access sowie zu
on technologies and products nden Sie unter
Technologien und Produkten is available at
goepel.com/
goepel.com/en/variotap
goepel.com/variotap
ISO 9001 certied
BST-TF / E / 2012-04
Internet: www.goepel.com
sales@goepel.co.uk
sales@goepelusa.com
sales@goepel.asia
sales@goepel.fr
Get the total Coverage!
"