IN-LINE MINIFILTERS0 pages

inline
minifilter
Easy maintenance, for filtering Hot Melt impurities.
PRODUCT DESCRIPTION

GLUING
SOLUTIONS

The Meler inline mini-filter is used to remove Hot-Melt impurities before they reach the gun
nozzles.
It is installed between the gun and hose and consists of a threaded body which is attached to
the gun, a filter cartridge and a connector, available in three different configurations, which is
connected to the hose.
The Meler inline mini-filter is appropriate for operation with nozzles with a diameter under
0.4 mm, in rolling guns up to 50 mm or in any other application that requires removing
residual impurities from the system or from hot-melt.
Design characteristics:
1. t The filter cartridge can be replaced without the need to remove the unit from the hose
or gun.
2. t Easy to replace filter cartridge: unscrew and remove.
3. t Modular configuration to suit any assembly need with different angle.
4. t Stick-proof coating ensures easy cleaning.
5. t Filter cartridges are easily identifiable by etched markings on the upper part.
TECHNICAL CHARACTERISTICS
Material ..................................................................... stell
Filtering range ........................................................... 50, 100. 200 Mesh
Maximum pressure ................................................... 200 Kg/cm2
Maximum working temperature ............................... 230ºC
Maximum recommended viscosity ........................... 10.000 cps
External coat ............................................................. anti-adhesive
Weight ...................................................................... 160 grs.
Thread ...................................................................... 9/16” 18h UNF