F204 Universal Loadcell0 pages

F204
Universal Loadcell
Standard Ranges 10, 25, 50, 100, 250 and 500kN (1 to 50tonnef)

♦ Large internal interfacing threads
♦ High structural load limit
♦ Flying lead or connector option
♦ Sealed to IP65
♦ Traceable calibration with certificate
included in the standard price
♦ Standard 2 year warranty

Geometry: Axial strain cylinder in a weather sealed stainless steel case, with end internal
fixing threads. For use in tension and compression loaded in line with the axis. With bidirectional versions there is a small difference between the output signal for compression
and tension. All standard bi-directional loadcells are calibrated in both modes and the
output for each direction is stated on the test / calibration certificate.
The F204 is ideally suited to bi-directional engineering force measurements. They are used
extensively within the automotive industry for testing of auto components. Standard rod end
bearings are available for this product. If you require better performance than the F204 the
F317 may be suitable.
We are happy to design variants of this loadcell to meet your specific requirements.
Versions can be manufactured for fully compensated operation up to +250°C. Please
consult our engineering department.
Details of our other loadcell families can be found in the Product List and the Loadcell
Specifier Guide. If you require copies please contact our sales department or look on our
web site at www.novatechloadcells.co.uk.
Ordering Codes: See the loadcell ordering code sheet for more details. Add range in the required units.
F204CFR0K0
Compression, IP65, unrationalised
F204TFR0K0
Tension, IP65, unrationalised
F204UFR0K0
Bi-directional, IP65, unrationalised
Change the F to a P for the connector version.

F204CFR0KN
F204TFR0KN
F204UFR0KN

Compression, IP65, rationalised
Tension, IP65, rationalised
Bi-directional, IP65, rationalised