F2090 pages

F209
Donut Loadcell
Standard Ranges 1000, 2000 and 4000kN (100 to 400tonnef)

♦ Hardened stainless steel body
♦ Very high structural load limit
♦ Standard 2 year warranty
♦ Tensile applications are ‘fail-safe’
♦ Flying lead or connector option
♦ Traceable calibration with certificate
included in the standard price

Geometry: Axial strain cylinder in a sealed case, with raised end load bearing faces and hole
right through. For use in compression or in fail-safe tensile applications.
The F209 is ideally suited to engineering force measurements including through centre
safety testing of cables, rods and bolts.
It is designed for easy installation, usually between two flat faces bearing on its loading
rings, either unattached or with retaining spigots positioned in the centre hole. Alternatively
tensile load transfer can be achieved via a tie rod assembly through the centre hole. In this
way the loadcell can indirectly measure tensile loads in a “fail-safe” mode.
We are happy to design variants of this loadcell to meet your specific requirements. Please
consult our engineering department.
Details of our other loadcell families can be found in the Product List and the Loadcell
Specifier Guide. If you require copies please contact our sales department or look on our
web site at www.novatechloadcells.co.uk.
Ordering Codes: See the loadcell ordering code sheet for more details. Add range in the required units.
F209CFR0H0
Compression, IP65, unrationalised
Change the F to a P for the connector version.

F209CFR0HN

Compression, IP65, rationalised