F2140 pages

F214
Loadstud
Standard Ranges 15, 30 and 60kN (1.5 to 6tonnef)

♦ Hardened stainless steel body
♦ Compact ‘in line’ installation
♦ Small diameter
♦ Low cost
♦ Traceable calibration with certificate
included in the standard price
♦ Standard 2 year warranty

Geometry: Axial strain rod in weather sealed case, with external fixing threads. For use in
tension or compression.
With bi-directional versions there is a small difference between the output signal for
compression and tension. All standard bi-directional loadcells are calibrated in both modes
and the output for each direction is stated on the test / calibration certificate.
The F214 is ideally suited to engineering force measurements, particularly with push pull
actuator / linkage arrangements where self-alignment and axial force transmission is
achieved by hardware design.
We are happy to design variants of this loadcell to meet your specific requirements.
Versions can be manufactured for fully compensated operation up to +250°C. Please
consult our engineering department.
Details of our other loadcell families can be found in the Product List and the Loadcell
Specifier Guide. If you require copies please contact our sales department or look on our
web site at www.novatechloadcells.co.uk.
Ordering Codes: See the loadcell ordering code sheet for more details. Add range in the required units.
F214CFR0H0
F214TFR0H0
F214UFR0H0

Compression, IP65, unrationalised
Tension, IP65, unrationalised
Bi-directional, IP65, unrationalised

F214CFR0HN
F214TFR0HN
F214UFR0HN

Compression, IP65, rationalised
Tension, IP65, rationalised
Bi-directional, IP65, rationalised