High Pressure Diffuser (HPD III) for Airborne Particle Counters0 pages

Aerosol Monitoring Accessory

Aerosol Monitoring Accessory

The High Pressure Diffuser reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), Argon and Nitrogen to a level acceptable to particle counters designed to operate at atmospheric pressure. >

BENEFITS FEATURES Benefits

No moving parts to wear Օ Connects via male 4-VCR fitting Measures gases from 25 to 100 psi Օ Exhaust filter included reduces contamination when no flow is present No external flow meters needed Օ Measures particles as small as 0.3 um Mounting clamps supplied Օ Low contamination, less than 5% of ISO Class 5 cleanliness Stainless steel construction >

Cost Effective

Օ Economical monitoring of pressurized gases with atmospheric pressure particle counters >

COMPATIBILITY

For use with: - Lasair II particle counters 310A, 310B, 510A, 350L, and 550L
- Airnet particle sensors 310, 510, 510 OPC, 510XR, and 510XR OPC
- Airnet particle sensors 301, 301 OPC, 501, and 501 OPC >

Flexible

Օ Can be used with Clean Dry Air, Argon, Nitrogen or other non-toxic inert gases Three different HPD III versions dependent upon flow rate Օ Three different versions for 0.1 CFM, 1.0 CFM and 50 LPM flow rates >

Without measurement, there is no control. HPD III High Pressure Diffuser