VibDAQ Data Acquision Module with ICP® or voltage inputs0 pages

ROGA-Instruments, Steinkopfweg 7, D-55425 Waldalgesheim
Phone: +49 (0) 6721-98 44 54, Fax: +49 (0) 6721-98 44 74
VIBDAQ-4+,8+,16+ series
The VIBDAQ-4+,8+,16+ series offers high-speed,
multifunctional data acquisition module in a portable
housing. Vibdaq is fully operated by USB 2.0.
Modules offer synchronous sampling for all channels
(0 degree phase shift), inputs can be set in ICP®
or voltage mode.
Everything what is needed to start the process of
acquiring, viewing and storing data is supplied with
Vibdaq card.
The VIBDAQ X+ features a high accuracy 24-
bit/97 kHz A/D converter, up to 16 analog input
channels (user can select the main module with the
appropriate number of channels: 4, 8 or 16). No Data
Lost (NDL) structure (512Mb RAM buffer), a
keyboard and a graphic display on the front panel make
this series of modules a unique offer on the market.
NDL® is a solution developed by EC Electronics and
implemented in multichannel USB instrumentation.
Device control
All VIBDAQ X+ parameters can be controlled via USB
(from PC software) or the keyboard and the graphic
display on the front panel of a unit.
Analog Input and Analog to Digital conversion
The VIBDAQ X+ has a 24-bit, 97 kHz/channel A/D
coupled with 4/8/12/16 single-ended inputs (sampling
rate can be compared to 16 channels, 2MHz standard
multiplexed card). Three software-programmable
ranges (x1, x10 and x100) provide inputs from ±10 V to
±100 mV full scale. Each channel can be configured by
the software (or the keyboard) to set a different
range, as well as ICP®/voltage input mode. The NDL
system (NonDataLost) structure ensures high
accuracy sampling even when operating at full
97 kS/Channel rate (>20Mb/s in USB interface). All
analog inputs of VIBDAQ X+ can accept ICP® (4.7mA
power current) and voltage mode transducers.
When ICP® input mode is selected, open and short
sensor/line circuit is tested.
Sampling frequency can be selected in 5 steps.
ICP® is a registered trademark of PCB Group, inc., Depew, New York.
ROGA-Instruments takes over no liability for the correctness
and/or completeness of the pictures and descriptions. We are left
to ourselves the right any time and without to carry out special
announcement changes in and/or the description.
INTELLIGENT MEASURING EQUIPMENT
www.roga-instruments.com
VibDAQ
Data Acquision Module with
ICP® or voltage inputs