Plug.n.DAQ Lite IEPE USB Front End0 pages

INTELLIGENT MEASURING EQUIPMENT
www.roga-instruments.com
ROGA-Instruments, Steinkopfweg 7, D-55425 Waldalgesheim
Phone: +49 (0) 6721-98 44 54, E-Mail: info@roga-instruments.com
Plug.n.DAQ Lite
IEPE USB Front End
ROGA Plug.n.DAQ Lite
Plug.n.DAQ Lite is a compact 2channel in/out data
acquisition device for recording and analysis. It features
the widespread USB interface and requires no
driver installation. In adition to AC inputs it directly
supports IEPE-type sensors, such as microphones and
accelerometers. The outputs may be used for monitoring,
playback or signal generation.
Filters on the input and output and instrumentationquality
amplifiers ensure reliable 16-bit data. With a
bandwidth up to 24KHz per channel and simultaneous
sampling Plug.n.DAQ Lite is highly flexible and may be
used with all software packages supporting audio
devices. It comes in a rugged aluminum housing, prepared
to go wherever the measurement job requires.
Supported operating systems: All
Analog Input: 2ch single ended BNC, IEPE
Impedance 100 kOhm
IEPE power fixed 24 V/4mA
Input ranges 5 V
Bandwidth 3.5 Hz to 24 kHz (-3 dB)
10 Hz to 22 kHz (-0.5 dB)
Sampling Frequency 32 kHz; 44.1 kHz & 48 kHz
Absolute accuracy 1% typical
Gain accuracy 0.2 % or better
Distortion < 0.05 %
S/N 90 dB typical
Aliasing rejection -70dB (up to 0.4xfs)
Pass band ripple 0.05 dB
Analog Output: 2ch single ended BNC
Output 1 V, 100 Ohm
Bandwidth 1 Hz-20 kHz (+/-0.5dB, 48KHz FS)
0.5Hz–24KHz (-3dB, 48KHz FS)
Absolute accuracy 1% typical
Distortion < 0.02%
S/N > 90 dB
Pass band ripple 0.2 dB
Out of band rejection -50 dB or better
Others:
Sampling rates (simultaneous sampling 16bit)
48 KHz, 44.1 KHz, 32 KHz, 22.05 KHz,
16 KHz, 11.025 KHz, 8 KHz (analog in only)
Powered by USB (power consumption < 1W)
Usable temperature range +/- 0 to +50 °C
Storage temperature range -10 to +60 °C
Dimensions 82 (w) x 150 (d) x 32 (h) mm
Weight Approx. 50 grams
TECHNICAL DATA: