LX-100 Series LX-110 / LX-1200 pages

Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.R
ROGA Instruments
Steinkopfweg 7, 55425 Waldalgesheim, Germany
Phone : +49-6721 984454
FAX : +49-6721 984474
URL : http://www.roga-instruments.com
Copyright TEAC CORPORATION 2008 PRINTED IN JAPAN 0308 1 NH BSC-030A
DC Input Amp PA Input Amp Strain Input Amp
Input Input and Output Input Input and Output Input Input and Output
8ch 16ch 32ch 8ch 16ch 8ch 16ch 32ch 8ch 16ch 8ch 16ch 32ch 8ch 16ch
3.6/7.9 3.9/8.6 6.1/13.4 3.9/8.6 6.1/13.4 3.6/7.9 3.9/86 6.1/13.4 3.9/8.6 6.1/13.4 3.6/7.9 3.9/7.9 6.1/13.4 3.9/8.6 6.1/13.4
3.7/8.1 4/8.8 6.2/13.6 4/8.8 6.2/13.6 3.7/8.1 4/8.8 6.2/13.6 4/8.8 6.2/13.6 3.7/8.1 4/8.8 6.2/13.6 4/8.8 6.2/13.6
30 36 48 36 48 35 46 66 46 66 40 56 86 56 86
36 42 56 42 56 41 52 76 52 76 46 62 92 62 92
( AR-LXDC100 ) ( AR-LXPA100 ) ( AR-LXST100 )
--- --- --- Unbalanced --- --- --- Unbalanced --- --- --- Unbalanced
--- --- --- DC --- --- --- DC --- --- --- DC
--- --- --- 75 ohm --- --- --- 75 ohm --- --- --- 75 ohm
--- --- --- +/-1 to 5 V , 0.1 V Step --- --- --- +/-1 to 5 V , 0.1 V Step --- --- --- +/-1 to 5 V , 0.1 V Step
--- --- --- Combination of Analog fillter + Digtal fillter --- --- --- Combination of Analog fillter + Digtal fillter --- --- --- Combination of Analog fillter + Digtal fillter
--- --- --- DC to the sampling frequency(listed above)/2.4 +/-0.5dB --- --- --- DC to the sampling frequency(listed above)/2.4 +/-0.5dB --- --- --- DC to the sampling frequency(listed above)/2.4 +/-0.5dB
--- --- --- 16 / 24 Bits --- --- --- 16 / 24 Bits --- --- --- 16 / 24 Bits
--- --- --- 128 times over sampling delta sigma method : --- --- --- 128 times over sampling delta sigma method : --- --- --- 128 times over sampling delta sigma method :
however 64 times over sampling at 40kHz however 64 times over sampling at 40kHz however 64 times over sampling at 40kHz
--- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less
--- --- --- +/-0.2 % or less --- --- --- +/-0.2 % or less --- --- --- +/-0.2 % or less
--- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less
--- --- --- 87 / 93 dB ( in band ) ( 1V input ) --- --- --- 87 / 93 dB ( in band ) ( 1V input ) --- --- --- 87 / 93 dB ( in band ) ( 1V input )
--- --- --- -78 dB (At 20 kHz or less) -75 dB (At 40 kHz or less) --- --- --- -78 dB (At 20 kHz or less) -75 dB (At 40 kHz or less) --- --- --- -78 dB (At 20 kHz or less) -75 dB (At 40 kHz or less)
--- --- --- 1 deg or less (At 20 kHz or less) 3 deg or less (At 40 kHz or less) --- --- --- 1 deg or less (At 20 kHz or less) 3 deg or less (At 40 kHz or less) --- --- --- 1 deg or less (At 20 kHz or less) 3 deg or less (At 40 kHz or less)
--- --- --- BNC --- --- --- BNC --- --- --- BNC
Unbalanced Balanced and Unbalanced Balanced and Unbalanced
DC Balanced DC, Balanced AC, Unbalanced DC DC
1 M ohm 1 M ohm 1 M ohm
+/- 0.5/1/2/5/10/20/50 V +/- 0.01/0.0316/0.1/0.316/1/3.16/10/50 V DC mode : +/- 1/2/5/10 V, ST mode : 500/1000/2000/5000/10000/
20000/50000/100000 microST, Precision(range value) +/-1% or less
+/- 100 V +/- 50 V, but +/-100 V in the +/-50V range +/- 25V
Joint use of both a digital filter(*) and an analog filler(2nd Order Butteworth) Joint use of both a digital filter(*) and an analog filler(2nd Order Butteworth) Joint use of both a digital filter(*) and an analog filler(2nd Order Butteworth)
10,30,100,300,1k,3k,10k,30kHz,Pass:-48dB OCT Butterworth filter (Switched
--- --- Capacitor Filter = SCF) for 8 channels indeependent;At LPF to Pass Joint use of
both a digital filter(*) and an analog filter (2nd Order Butterworth)
DC to the sampling frequency ( listed above )/2.4 DC Coupling : DC to the sampling frequency (listed above)/2.4, DC Method : DC to the sampling frequency (listed above)/2.4, +0.5/-3 dB
+/-0.5 dB AC Coupling : 1Hz to the sampling frequency (listed above)/2.4, +/-0.5 dB ST Method : DC to 30 kHz, +0.5/-3 dB
16bits/24Bits 16bits/24Bits 16bits/24Bits
128 times over sampling delta sigma method : however 64 times over sampling at 40kHz 128 times over sampling delta sigma method : however 64 times over sampling at 40kHz 128 times over sampling delta sigma method : however 64 times over sampling at 40kHz
+/-0.1 % or less +/-0.1 % or less +/-0.1 % or less
DC mode : same as DC100
ST mode : ( SCF : 10kHz, 30kHz),
Sampling Frequencies 24kHz, 96kHz
10000microST 0.1% or less
+/-0.1 % or less +/-0.1 % or less +/-0.1 % or less
1 deg or less ( At 20 kHz or less ), 3 deg or less ( At 400 kHz or less ) 1 deg or less ( At 20 kHz or less ), 3 deg or less ( At 400 kHz or less ) 1 deg or less ( At 20 kHz or less ), 3 deg or less ( At 400 kHz or less )
--- Possible ( V 0.9 ) ---
BNC BNC Lemo 7-pin, 10ø (ECG0 Type )
Main Body * LX-110 / LX-120
Number of Channels * 8 / 16 / 32
Amplifier * DC / PA / Strain / Output
Recording Devices * Internal Memory / PC card
Interface * Ethernet / Firewire(IEEE1394)
Remote Control Unit / PC
Accessories
DC Cable
AC Adapter
LX Navi software
Sampling Frequenies Input Range Distortion factor
48k, 96kHz 0.316V or over +/-0.1% or less
0.1V or less +/-0.2% or less
24k or less All +/-0.4% or less
Sampling Frequenies Measurement Fequency Distortion factor
96kHz 20kHz +/-0.1% or less
48kHz 10kHz +/-0.07% or less
24kHz or less fs / 4.8 +/-0.4% or less
Weighting FLAT/A/C
HPF OFF/10/20 Hz
Supply voltage 28V DC/4mA
for a sensor
Gauge Factor 2.0 Bridge Connection Full Bridge
Applicable Gauge Resistance 120 to 2000 ohm Bridge Method DC
Remote Sensing Possible Bridge Voltage 2V (+/-1V)
Balance Range +/- 10000 microST 10V(+/-5V)
Balance Method By electronic auto balance
Input Range band ( dB ) 20kHz 40kHz
0.01V 64 / 67 60 / 63
0.0316V 74 / 77 69 / 72
0.1V 83 / 86 77 / 80
0.316 / 1 V 87 / 93 77 / 80
3.16 / 10 / 50 V 87 / 98 77 / 80
Input Range band ( dB ) 20kHz 40kHz or less
All -82 / -88 -80 / -86
( in band ) ( in band )
Input Range band ( dB )
Other of 20V 84 / 96 ( in band )
20V 84 / 94 ( in band )
Input Range band ( dB ) 1kHz 3kHz 10kHz 20kHz 40kHz
0.25 mV/V 67 62 58 --- ---
0.5 mV/V 73 68 64 --- ---
1 mV/V 75 74 71 --- ---
2.5 / 5 / 10 / 25 / 50 mV/V 75 75 75 --- ---
1 / 2 / 5 / 10 V --- --- --- 87/93 77/83
Input Range band ( dB ) 20kHz 40kHz
0.01V -64 -60
0.0316V -73 -69
0.1V -78 -74
0.316 / 1 / 3.16 / 10 / 50 V -78 -74
Input Range band ( dB ) 1kHz 3kHz 10kHz
0.25 mV/V -67 -62 -58
0.5 mV/V -73 -68 -64
1 mV/V -75 -74 -71
2.5 / 5 / 10 / 25 / 50 mV/V -75 -75 -75
96 / 48 / 24 / 12 / 6 / 3 / 1.5 kHz ( Common to each Channel )
102.4 / 51.2 / 25.6 / 12.8 / 5.12 / 2.56 / 1.28 kHz
65.536 / 32.768 / 16.384 / 8.192 / 4.096 / 2.048 / 1.024 kHz
100 / 50 / 20 / 10 / 5 / 2 / 1 kHz ( Common to each Channel )
Num. of Input Channels : 12 x 16 bit Channels, 2 x 32 bit Channels (Highest sampling frequncy settings
support the moving average only at one(1))(Cannot be used simultaneously with generator output )
Use the lowest 1bit for techometer pulse timing bit.
Input Format : Threshold level selections +0.5/1/2.5/10/20 V ( Max allowable input voltage is 50V )
Input Connector : BNC
Frequency Division Ratio Setting : 1 to 255
Moving Average Measurement : 1 to 16
Measurement Mode : Pulse count mode(Count of number of pulses within the gate time; Conunt of the total
number from start to stop), Cycle count mode, Frequncy measurement mode, RPM mode
(Cannot be used simultaneously with tachometer pulse input )
Num. of Output Channels : 1
Output signal : Sine wave, Sweep Sine wave, Pulse, Pink noise, White noise
2 / 4 / 8 / 16 / 24 / 32 ch
Choice of Memory only ,Memory + PC card drive *
PC card is Flash memory , supports up to 8GB capacity ( FAT16 or FAT32 )
Choice of 10BASE-T/100BASE-TX or Firewire ( IEEE1394 )
( Specify one when you order )
REC, FWD, REC FWD, STOP, PAUSE, EVENT, P.LOCK
1 ( analog output ) , BNC
+/-1 to 5 V ( 0.1 V step )
1
1 each
Memory Approx. 1.6 MB/s, PC card Approx.0.8 MB/s
Firewire ( IEEE1394 ) Approx. 1.6 MB/s, Ethernet Approx. 0.8 MB/s
+/-1 ppm ( 25 deg C )
5 to 35deg C, Humidity 20 to 85%RH ( Operation )
+/- 30 seconds adjustment
11 to 30 V DC
CE, VCCI
Conforms to MIL-STD-810 Figure 514.4-1,2,3
for the models with memory only memory + PC card drive
Approx 300 x 65 x 200 mm
Approx 11 13/16" x 2 9/16" x 7 7/8"
Low speed sampling Cutoff Frequency Attenuation
1kHz 400Hz -80dB ( at 500Hz )
500Hz 200Hz -80dB ( at 250Hz )
200Hz 80Hz -80dB ( at 100Hz )
100Hz 40Hz -80dB ( at 50Hz )
50Hz 20Hz -80dB ( at 25Hz )
20Hz 8Hz -80dB ( at 10Hz ) ( Aliasing may occur at
10/5/2/1Hz 4Hz -80dB ( at 5Hz ) and under 5Hz sampling )
2/5/10/30/60s (cycle) 4Hz -80dB ( at 5Hz )
S/N is a difference of noise level for 100% of each input range. Dynamic range is the greatest input level
and a difference of noise level of each input. Dynamic range S/N +2dB The overall accuracy specified
here is the accuracy of the analog output when using an input amp and an analog output amp, and may
differ depending on the frequency characteristics and the input range of the input amp.
Sampling Frequencies
LX-110
LX-120
Sampling Frequencies
LX-120 only
Tachometer Pulse Input
LX-120 only
Generator Output
LX-120 only
Input Channel change
Recording Devices
Inteface
Front Panel Control Keys
Monitor Channel
Monitor output level
Microphone Jack
Speaker and Earphone Jack
MAX. Recording Rate
PC Throughput
Time Precision
Temperature and Humidty
Internal Clock Correction
Power Supply
Safety Standards
Vibration
External Dimension (WxHxD)
(Excluding protruding parts)
Input Format
Input Coupling
Input Impedance
Input Range
(over-range to +/-127%)
Absolute Max. Input Voltage
Anti aliasing filter
LPF
Frequency Bandwidths
Num,of Quantizing Bits
Conversion Method
Linearity
Distortion Factor
Range Accuracy
Signal to Noise ratio
(16bits/24bits)
(25 deg C)
Crosstalk
Inter-channel phase difference
TEDS sensor
Input Connecter Type
Output Format
Output Coupling
Output Impedance
Output Range
Smoothing Filter
Frequency Bandwidths
Num,of Quantizing Bits
D/A Conversion Method
Linearity
Distortion Factor
Range Accuracy
Signal to Noise ratio
(16bits/24bits)(25 deg C)
Crosstalk
Inter-channel phase difference
Output Connecter Type
Weight LX-110
Approx (kg/lb) LX-120
Power LX-110
Consumption(W) LX-120
Input Amp Type
I/O Type
Channels
LX-100 Series Specification
Output amplifier Input amplifier Main body
* Specify one
when you order
LX-100 Series
LX-110 / LX-120
- FAT32 file system for large capacity card
- 100dB dynamic range by 24 bits AD
- Records voltage, sound, vibration and strain from DC to 40kHz
- Supports various popular analysis software formats
- Records in TAFFmat data format.
LX-100 Series data acquisition and recording system pursues the usability and reliability in the field.
LX-100 Series supports FAT32, 24bits AD conversion and RoHS ( Restriction of Hazardous Substances ).
Pursuit of "Usability" and "Speed".
LX-100 Series Endless evolution of data recording
http://www.roga-instruments.com
Data Recording and Acquisition Unit
RoHS
Compliant