TranSlicer 2000® Cutter0 pages
TranSlicer 2000® Cutter
High Capacity Precision Slicing
2
3
1
TranSlicer 2000® Cutter
SPECIFICATIONS
OPERATING PRINCIPLE
Length:.. . . . . . . . . . . . . . . . . . . 126.65" (3217 mm)
Product is delivered onto two high speed feed belts [ 1 ] sloping together
to form a “V” shaped feed trough. The belts are synchronized with the
rotating slicing wheel [ 2 ] to ensure proper advance of product per
revolution of the wheel. Knives [ 3 ] under tension serve as spokes and
support the rim of the slicing wheel. The knives are slightly twisted to create
a uniform pitch from the hub to the rim. Knife pitch serves to pull product
through the slicing wheel and produce a precise slice thickness. Optional
free wheeling or motorized top belts are available if more positive feeding
is needed. One slice is made at a time which prevents any crushing of the
product. The cut slices are then released into a hinged, discharge chute to
reduce their speed before exiting the machine.
Width: . . . . . . . . . . . . . . . . . . . . . . 34.12" (867 mm)
Height: . . . . . . . . . . . . . . . . . . . . . 55.75" (1416 mm)
Net Weight: . . . . . . . . . . . . . . . . . . 1288 lb (580 kg)
Motor: . . . . . . . . . . . . . . . . . . . . . . . . 3 HP (2.2 kW)
Feed Belt Motor: . . . . . . . . . . . . . . . . . 1 HP (.75 kW)
APPLICATIONS
The ‡patented TranSlicer 2000® Cutter by Urschel Laboratories
uniformly slices with precision at high capacities and is ideally suited
for elongated products. Products effectively cut on the machine include
potatoes, plantain, celery, asparagus, beans, peppers, lettuce, bread
sticks, carrots, zucchini, chicken tenders, wieners, citrus peel, extruded
products, pickles, pepperoni, and many other applications.
The TranSlicer 2000 accepts firm products up to 4" (101.6 mm) in
diameter and leafy-type, more compressible products up to 6" (152.4
mm) in diameter.
Three interchangeable stainless steel cutting wheel styles are possible
for maximum versatility: slicing wheel, ¥patented MicroSlice® wheel, and
julienne wheel. The TranSlicer 2000 offers simplified design with hinged
and sliding access panels which ease maintenance and cleaning. The
machine features continuous operation for uninterrupted production.
If your product application is not mentioned on this page, contact your local
Urschel representative to determine the most effective solution to your size
reduction needs.
TYPES OF CUTS
SLICING WHEELS
Flat & Crinkle Slices: 1/32 to 3" (.8 to 76.2 mm) in thickness Crinkle slices have 4-2/3 waves per inch and with
a crinkle depth of 1/16" (1.6 mm). Slicing wheels can
be converted to crinkle slicing by replacing the straight
knives with crinkle knives. A different shear edge must
also be used for crinkle slicing.
JULIENNE WHEELS: Julienne cuts ranging from 1/2 x
1/2" (12.7 x 12.7 mm) to 2 x 2" (50.8 x 50.8 mm) are
produced by using julienne knives on the slicing wheel.
MICROSLICE® WHEELS
Flat Slices: .020 to .240" (.5 to 6 mm)
Crinkle Slice: .069" (1.8 mm) thickness with 3-1/3 waves
per inch and with a crinkle depth of .080" (2.0 mm)
Oval Shred: This shred has an oval-shaped cross section measuring approximately .125" (3.2 mm) thick by
.250" (6.4 mm) wide.
Julienne Strips: A wide range of julienne strips can be
made from firm products. Contact your local representative for more information.
(over)