Comitrol® 36000 pages
Comitrol® Processor Slant Model 3600
Controlled Particle Size Reduction
Cutting
Head
Impeller
Comitrol® Processor
Model 3600 Slant
SPECIFICATIONS
Comitrol® Processor Model 3600 Slant:
Length: . . . . . . . . . . . . . . . . . . . . . . . 35.69" (907 mm)
Width: . . . . . . . . . . . . . . . . . . . . . . . . 29.21" (742 mm)
Height: . . . . . . . . . . . . . . . . . . . . . . . 38.64" (981 mm)
Net Weight: . . . . . . . . . . . . . . . . . . . . . 400 lb (181 kg)
Motor: . . . . . . . . . . . . . . . . . Impeller - 10 HP (7.5 kW)
APPLICATIONS
The compact size of the Comitrol Processor Slant Model 3600
makes the machine ideal for a wide range of small volume to high
capacity production environments.
Processors benefit from the wide selection of cutting heads and
impellers that are available for diverse applications such as chopping,
flake cutting, granulating, pureeing, and emulsifying.
Foods such as meats, poultry, fruits, vegetables, and cheeses can
be processed as well as many chemical and pharmaceutical products.
The machine features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance.
Product
COMITROL® PROCESSOR MODEL 3600 SLANT
OPERATING PRINCIPLE
Product is guided to the high speed, rotating impeller. When product reaches the impeller, it revolves at a high speed inside the cutting
head. Centrifugal force propels the product outward past the cutting
edges of the stationary reduction head. The cutting head has uniformly
spaced thin horizontal bars, or separators. Small portions of product
projecting into the spaces between the separators are cut off into
flakes by spaced columns of vertical knives. These flakes quickly travel outward and away from the cutting head. The wall surfaces between
the vertical knives are relieved to eliminate rubbing friction that would
produce heat.
Product
Horizontal
Separators
Impeller
Vertical
Knives
CUTTING HEAD ASSEMBLY
TYPES OF CUTS
Particle sizes ranging from coarse to fine emulsions are possible. To
ensure the proper combination of cutting parts, Urschel Laboratories, Inc.
recommends your product be tested in one of our worldwide Product Test
Cutting Facilities free-of-charge to find the most efficient solution to your
size reduction needs.
http://www.urschel.com
E-mail: info@urschel.com
®Comitrol and Urschel are registered trademarks of Urschel Laboratories, Inc.
L2188 (s.s. L2065) JULY 2008
If your product application is not mentioned on this page, contact your local Urschel representative to
determine the most effective solution to your size reduction needs.