Data sheet - Level detector for solids - SOLIBA0 pages

TECHNICAL SHEET

SOLIBA
LEVEL DETECTOR FOR SOLIDS
For high level detections

USE

WIRING

Stops the filling

SIZE
Height: 152 mm – Diameter: 95 mm

DIFFERENTIAL ANGLE

Please, refer to the
connection diagram
enclosed to each float
delivered.
APPLIANCES
Device adapted for solids level detections (cereal, grain, granular, pulverulent silos, etc.). Placed vertically, it
is generally used to stop the filling of silos and other means of storage. Must only be used in
«NON EXPLOSIVE» areas.
TECHNICAL CHARACTERISTICS
Operation mode

By tilting

Use

To stop the filling of silos (cereals, pulverulents)
Only in « NON EXPLOSIVE » areas

Maximum temperature

85°C

Protection index

IP 68

Electric characteristics

250 VAC- 50/60 Hz

Cut-out power

20 (8) A (20 A resistive - 8 A inductive)

Microswitch

Silver / Cd oxide contacts

Biconical shell

Copolymer polypropylene

Cable

Neoprene H07RN8-F

Cable type

3 conductors 1 mm²

Float weight without cable

462 g

Cable weight

Neoprene 115 g/m

Adjustable ballast on cable (option)

Loaded resin 250 g

Standard cable length (series)

5, 6, 10, 13, 15, 20 and 30 m (other lengths on request)

Nº 200406986

ATMI – Z.A. de l’Observatoire – 2 avenue des Bosquets – 78180 Montigny le Bretonneux – France
Tél:+33 (0)1 61 37 35 60
Fax: +33 (0)1 61 37 35 69
Site Internet: www.atmi.fr
E-Mail: info@atmi.fr

Doc.Tec-6905M-10/08

Important specification