Product MG4 T.V.E.0 pages

PRESSE PER IMBALLAGGIO | AUSONIA SRL Via Balegante, 25 31039- RIESE PIOX° (TV) Italia Tel. 0423 755303 - Fax 0423 759126 E mail:info@ausoniasrl.it www.ausoniasrl.it Partita iva 03315980262 iscr.reg. impr. TV 312041-1997 Product MG4T.V.E. Vertical hydraulic press for compacting and shaping bales or recyclable materials such as: cardboard paper, nylon plastic, big-bags, fibre-glass and insulation in general, expanded and soft polyurethane, sponge foam, PET and tetrapak bottles, leathers, rags, cloths, generic trash, etc.. The model MG4 T.V.E. press features a fully-closed compacting chamber. The materials loading and bale ejecting doors can be opened. The electrical panel is located on the side as are built-in command buttons on the semiautomatic version which is also protected by specific carter. The material is front-loaded, the materials holding systems optimise loading times, ensuring that the loading chamber is always empty at the end of every pressing cycle. - Beeper announces that the bale is ready. This system lets you guarantee that the bales area all similar to each other, in terms of weight and dimensions. The beep height is adjustable. tin, can and small drum compactor platen accessory. - Liquid containment and collection drip pan. - Roof cover for outdoor positioning. - ATEX directive-compliant electric panel and remote control-unit. - Extended cylinder to yield smaller bales. - Addition of two transversal bindings. - Cage-type holding system for particular materials - Blocks for excluding the holding systems of crushed materials. - Dust suction and collecting hoods in loading chamber. - Front doors with openings for closed door binding, suited for extremely elastic return materials. - The cylinder and control unit of the 6Ton model can be applied to yield small, very compact bales. The compacting cycle (up and down phases of the compactor) may be either automatic button-operated or semi-automatic lever operated. Bale binding is preset, it happens with doors open, it is bound manually, with polypropylene banding (4 coils are supplied) Thanks to the slots on the back of the chamber, steel wire or bands can be used to bind. Bales are automatically ejected by a belt fitted to the back wall of the press, which is activated by the rising plate. Closing of the bale-ejection door is done via hand wheel to ensure safe opening even with the more plastic (bounce-back) materials. The press can be positioned against a wall. It only needs front space for material to be loaded and to expell the bales. The hydraulic circuit is fitted with a safety locking valve to prevent the platen from falling. The press is made be fastened to the ground. It can also be installed outdoors, provided the control unit assembly and control panel are protected. The press is epoxy varnished. The standard press colour is RAL 7016 grey , moving parts and protections are RAL 1007 yellow. The colours of the press can be changed according on the RAL table. The press is tested at the Ausonia works prior to being shipped. The MG4 T.V.E. is shipped vertically, fully loaded with oil and with circuit bled. Upon receiving the unit just replace the non-bleeder cap with the supplied bleeder cap, check the direction of rotation of the electric motor (only in the 380V versions) and the machine is ready for use. The usage and maintenance manual delivered with the press, and which must be read by operators prior to use, explains every detail for every operation and the use of the machine. AUSONIA SRL - Via Balegante, 25 31039- RIESE PIOX° (TV) Italia - Tel. 0423 755303 - Fax 0423 759126 E mail:info@ausoniasrl.it - www.ausoniasrl.it - Partita iva 03315980262 - iscr.reg. impr. TV 312041-1997