MED 16x1.125 Tubular Frame Solenoid0 pages

MED 16x1.125 Deltrol ^ CONTROL! TUBULAR FRAME SOLENOID Two position linear solenoid with tubular frame construction. Features  High performance construction Օ DC solenoids applications only  Standard push and pull versions available Օ UL approval on many models Electrical Specifications Coil Voltages 6, 12, 24, 115 VDC Coil Power 8 Watts Continuous, 19 Watts Intermittent, 77 Watts Pulse Coil Termination Wire leads 24 AWG (standard) Duty Cycle Continuous, intermittent and pulse (See standard part numbers on page 4) Coil Treatment Tape Wrapped Insulation Class Class A Rating - 105°C (221°F) Max. Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 1.125" (L) x 01.000" (D) Forces See force curves on page 3 Plunger Diameter 0.4375" Plunger Guide Material Plastic Mounting 0.875" Hex Nut Weight Plunger - 1.05 oz, Total - 4.375 oz Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approvals UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com