D-50 D-Frame Solenoid0 pages
D-50 @ Deltrol ^ CONTROLS D-FRAME SOLENOID Two position linear solenoid with D-frame construction. Features Balance of cost and performance Օ AC solenoids and DC solenoids available UL approval on many models Electrical Spթcifications Coil Voltages 12, 24, 120, 240 VAC, | 6, 12, 24, 110 VDC Coil Power 14 VAC Continuous, 53 VA Intermittent, 140 VA Pulse 10 Watts Continuous, 25 Watts Intermittent, 100 Watts Pulse Coil Termination Wire leads (standard) Duty Cycle Continuous, intermittent and pulse duty available (see standard part numbers on page 4) Coil Treatment Tape Wrapped Insulation Class Class A Rating - 105°C (221°F) Max. (standard) Class B Rating - 130°C (266°F) Max. (optional) Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Spcifications Size 1.625" (L) x 1.562" (W) x 1.828" (H) (See page 2 for dimensional drawing) Forces See force curves on page 3 Plunger Diameter 0.500" Plunger Guide Material Plastic Mounting 4X #8-32 UNC-2B Mounting Holes Weight Plunger - 1.27 oz., Total - 12 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approval UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105, S130 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/08/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com
"