Stainless Steel-Lumiglas Luminaire USL 150 pages

lumiglas®
lumiglas
EN ISO 9001
Q A: 041003296
F.H.Papenmeier GmbH & Co. KG
P.O.Box 1620 · D-58211 Schwerte
Tel: +49-2304/2050 · Fax: +49-2304/205206
E-mail: info.lumi@papenmeier.de
www.lumiglas.de
Data sheet 06.15
• For use with sight glass fittings
This super-compact sight port luminaire is applicable for combination
view/sight port (single flange version) or separate light
and sight port (dual-flange version).
• This powerful super-compact size luminaire is designed to give
glare-free illumination with sight glass styles as follows:
DIN 28120, DIN 28121 or similar circular flanges, Visual Flow
Indicators, as well as weld-neck style series MV to DIN 11851
Nominal sizes depending on fixture type:
a) Circular weld-on sight glass series DIN 28120 starting at
DN 40…
b) Circular sight glass series DIN 28121 starting at DN 40…
c) Visual Flow Indicators
d) Circular weld-neck series MV similar DIN 11851 starting at
DN 65…
• Application:
Excellent in the pharmaceutical and food industry,
optimum for the illumination of bio-reactors, laboratory mixers,
filters, boilers, tanks, agitators, separators, pipes and other
sealed vessels in locations that are not potentially explosive.
• Protection:
Dust and waterjet tight to IP 65 per EN 60 529/ DIN VDE 0470,
Part 1 and NEMA Types 4 & 4X
• Operating conditions:
Independent of the pressure/ vacuum inside the vessel; maximum
allowable ambient temperature at the cable gland 90° C
Under no circumstances must the Lumiglas lamp be used for
sealing purposes in a vessel port in lieu of a sight port.
• Electrical information:
The Lumiglas lamp comes equipped with a 3 meter connecting
cable
• Operating voltage:
Without built-in transformer:
12 V, 24 V, 120 V… Halogen incandescent lamp, 20 W,
with or without built-in push-button;
Halogen incandescent lamp, 50 W
or 24 V/100 W,
with built-in push-button, 2-pin socket;
With built-in transformer:
120 V/230 V Halogen incandescent lamp 12 V/5 W,
with or without built-in push-button,
2-pin socket;
230 V Halogen incandescent lamp 12 V/20 W,
only with built-in push-button, 2-pin socket;
• Transformers:
Transformers for 12 or 24 V secondary voltage available upon
request
• Built-in momentary push-button on/off switch:
Momentary switches or timers are required for 50-Watt
luminaires.
Warning! When the luminaire - whether fitted with existing or
higher wattage lamp - is used in continuous ON mode, check the
temperature of the luminaire, its lens glass and the light/sight
glass fitting; these temperature values must not be allowed to
exceed those stated in the relevant data sheet and/or separate
sheet entitled “Installation and operating instructions for
lumiglas luminaires”.
If these values become critical, insert a momentary push
button or time delay switch in the power supply to the
luminaire to prevent overheating.
• Mounting bracket:
The mounting bracket for the lamp (pivoting hinge) is
included. Adapter flange for mounting series MV weld-neck
type sight port can be ordered separately.
Lumiglas Stainless Steel, Series USL15
Stainless steel Lumiglas luminaire USL15
Stainless steel Lumiglas luminaire series USL15 with hinged bracket
mounted onto a circular sight glass fitting series DIN 28120