Service Pleated Polypro Depth Cartridge Filters0 pages
GPD Cartridge Filters
Pleated Polypropylene Depth Media
Applications
Inks & Dyes
Air and Gases
Cosmetics
Process Water
Specialty Chemicals
Dimensions
Length
5 to 40 in. (12.7 to 101.6 cm) nominal
Outside Diameter
2.75 in. (7.0 cm) nominal
Filtration Area
5.8 ft2 (0.54 m2) per 10 in. length
(Average - area varies with media thickness
and porosity)
Maximum Operating Parameters
Differential Pressure
•t Forward
•t Reverse
Construction Materials
Filtration Media
Pleated Polypropylene Depth
Media
Media Support
Polypropylene
End Caps
Polypropylene
Center Core
Polypropylene
Outer Support Cage
Polypropylene
Sealing Method
Thermal Bonding
O-rings
Buna, Viton® (or FKM), EP, Silicone,
FEP Encapsulated Silicone, FEP
Encapsulated Viton (or FKM)
40 psid (2.7 bard) at 20 °C (68 °F)
Operating Temperature
82 °C (180 °F) at 10 psid
(0.69 bard) in water
Recommended
Changeout Pressure
35 psid (2.4 bard)
Sanitization/Sterilization
Filtered Hot Water
90 °C (194 °F), 30 minutes, multiple
cycles, max 3 psid forward flow
Autoclave
121°C (250°F), 30 min, multiple cycles
In-line Steam
135°C (275°F), 30 min, multiple cycles
For all elevated temperature procedures above, a stainless steel
support ring is required.
Chemical Sanitization
Performed using industry standard concentrations of hydrogen
peroxide, paracetic acid, sodium hypochlorite and other
selected chemicals.
Total Performance
Critical Process Filtration, Inc. is a vertically integrated manufacturer
of filtration products to industries in which filtration is considered
a critical part of the manufacturing process. We supply a complete
line of products and services to help you cost effectively satisfy all
your filtration requirements from a single source.
General Service Grade
General Service grade polypropylene GPD Depth Filter Cartridges
are designed for general purpose use wherever a cost effective
pleated depth filter is required. Rated at 99.9% efficiencies at the
rated pore size and designed to hold the maximum amount of
filter media that can be completely and effectively utilized in a
cartridge, GPD filters lower the cost of filtration. GPD cartridges
are flushed with 17+megohm-cm water to remove potential
extraneous manufacturing debris. Priced below special purpose
cartridges, GPD cartridges are manufactured with the same
careful attention to both quality and performance.
50 psid (3.4 bard) at 20 °C (68 °F)
"