Operation manual V0 pages
I Pulsarlube V Grease Selection Guidelines
Grease | Grease Type | Description |
PL1 | Multi Purpose | High performance NLGI #2 grade |
PL2 | Heavy Duty | Excellent heavy duty NLGI #2 with high viscosity base fluids and additional load carrying capacity |
PL3 | High Speed | High performance NLGI #1 grade |
PL4 | H1 Food Grade | USDA H1 NLGI #2 grade for applications where food grade product is required |
PL5 | High Temperature | Synthetic high performance NLGI #2 grade with oxidation stability |
PL6 | Multi Purpose M0S2 | Dark gray colored M0S2 containing mineral based product fortified extreme pressure property |
PL7 | Low Temperature | Fully synthetic product for extreme low temperature applications |
KiO': OEM filling is available upon request under special terms and conditions. Please contact your local distributor for more information.
I How to Dispose
1. Turn the Pulsarlube V unit off at the end of the dispensing period by pressing the top mode button inside the
yellow cap.
2. Dispose of the empty lubricator in a designated area. Comply with local regulation for waste disposal.
3. To avoid any potential injury or harzards, do not tamper with the product.
I Shelf Life and Product Warranty
The shelf life of each Pulsarlube V unit is 1 years from the date of production. Product warranty is limited to original defects in
material and workmanship and will not cover any collateral damage due to mishandling, abuse and/or any other inappropriate
use of this product. Warranty period is 1 year from the date of purchase.
I How to Order
V125 / PL1
V250 / PL2
Grease Type
Pulsarlube Model# (V125:125cc, V250: 250cc)
^) Pulsarlube USA, Inc.
1480 Howard Street, Elk Grove Village, IL 60007, USA
TEL: 1-847-593-5300 FAX: 1-847-593-5303 www.pulsarlube.com / info@pulsarlube.com
Doc No. 1022-000 REV. 130912
FSLfflltLUBE V
* USER MANUAL
Microprocessor Controlled Single Point Lubricator
I Specifications
in! V
Specifications | Description |
Grease Capacity | 125cc, 250cc |
Operating Pressure | 5kgf/crrf (70psi) |
Operating Temperature | -20"C~55"C (-4T-131T) |
Product Size | 125cc: 097mm (3.81") x 134mm (5.27") 250cc: 097mm (3.81") x 152mm (5.98") |
Weight | 125cc: 455g (1.001b), 250cc: 650g (1.431b) |
Installation Thread Size | 3/8" BSPT (NPT Converter Available) |
Gas Type | Nitrogen (N2) Gas |
Available Dispensing Periods | 1,2, 3,6,12 months & Purge (P) |
Certifications / IP code | Ex ia MC T4 / IP68 |
Remote Installation | Up to 1m (3ft) using an 8mm (5/16") O.D. pre-filled lube line |
^tuflH- Technical information is subject to change without prior notice.
ISO9001/14001 C€
Before Use
Thank you for purchasing the Pulsarlube V, the microprocessor controlled automatic grease lubricator from Pulsarlube
USA, Inc. The Pulsarlube V operates on the principle of inert Nitrogen (N2) gas generation through the use of an
electrolyte and electrical energy. To ensure the safe operation and proper installation of the Pulsarlube V unit, we
strongly recommend that you read the following information carefully before use. If you require further information,
please contact your local supplier or manufacturer.
I Product Details
Mode Cap
N2 Gas
Generation Cell
I EC Declaration of Conformity
According to ATEX - Directive 94/9/EC
Lubricant
Reservoir
3/8"BSPT Thread
Protector
Description | ||
Manufacturer | KLT Co., Ltd. 597-2, Geumseung-ri, Tanhyeon-myeon, Paju-Si, Gyeonggi-Do, South Korea | |
Product Description | Automatic Single Point Lubricator | |
Product Name | Pulsarlube V | |
Type | V125, V250 | |
lECEx | Ex ia IIC T4 IEC 60079-0:2007 IECExKTL10.0004X IEC 60079-11:2006 -20"CSTaS+55"C | |
ATEX | < | EN 60079-0:2009 uw EN 60079-11:2007 _ 111G ExiallCT4 EN 60079-26:2007 ► x) KEMA 10ATEX0150 X Z-f -20"CSTaS+55"C |
KCs | ma Ex ia IIC T4 Kfi 10-KB2BO-0226X -20"CSTaS+55"C |