F256 Axial Compensated Loadcell0 pages

F256
Axial Compensated Loadcell
Standard Ranges 200, 400, 800N and 1.25, 2.5, 5, 10, 20, 40, 60kN (20kg to 6tonnef)

♦ High accuracy
♦ Misalignment error compensation
♦ Highly adaptable inert end fixings
♦ Standard 2 year warranty
♦ Output rationalised to 2mV/V
♦ Traceable calibration with certificate
included in the standard price
Geometry: Beam and diaphragm combination. Tension, compression and bi-directional
options are available. All standard bi-directional loadcells are calibrated in both modes.
The loadcell's unique strain system compensates for typical force misalignment in force
measurement rigs and industrial weighing systems. Maximum error in axial force
component measurement is limited to 0.25% within a 3° angle swept through 360° around
the loadcell axis. Its various end-fixing options are all inert and easily modified for direct
inclusion in mechanical assemblies.
The basic versions are all sealed to IP65 with IP67 available as an option. Integral 4 to
20mA or ±10V output amplifiers can be fitted as an option, see the ordering code section.
See Engineering Application Sheet E032 and the ICA6H data-sheet for more information.
We are happy to design variants of this loadcell to meet your specific requirements.
Versions can be manufactured for fully compensated operation up to +250°C. Please
consult our engineering department.
Details of our other loadcell families can be found in the Product List and the Loadcell
Specifier Guide. If you require copies please contact our sales department or look on our
web site at www.novatechloadcells.co.uk.
Ordering Codes: See the loadcell ordering code sheet for more details. Add range in the required units.
F256CFR0KN
Compression, flat base, IP65
F256EFR0KN
Tension, eye base, IP65
F256LFR0KN
Compression, convex base, IP65
F256AFR0KN
Compression, female base, IP65
F256TFROKN
Tension, stud base, IP65
F256GFR0KN
Tension, female base, IP65
F256DFR0KN
Compression, stud base, IP65
F256JFR0KN
Bi-directional, female base, IP65
F256UFR0KN
Bi-directional, stud base, IP65
All F256s are rationalised as standard. Change R to an S for IP67. Integral amplifiers are not available with A, G or J
options in the standard body height. We can manufacture specials with increased height if integral amplifiers are required.