Stainless Steel Lumiglas Luminaire ME0 pages

lumiglas
Stainless steel Lumiglas luminaire series Lumistar ME Data Sheet 06.02.02
• Sturdy, attractively shaped, registered design-protected
• For use with screwed sightglass fittings
Providing combined sight and light port, suitable for circular
screwed sightglass fittings to DIN 11851 or similar dairy style,
sizes DN 65 to DN 125
• Application:
Designed for use in pharmaceutical and food processing
industries e.g. breweries, dairies etc. for illumination or
finternals of tanks, reactors, mixers, separators and other
normally closed vessels as well as pipelines in non explosion
hazardous areas.
• Protection:
When correctly fitted, dust and waterspray tight IP65 to EN 60
529/DIN VDE 0470 part 1
• Operating conditions:
Independent of vessel pressure/vacuum; max. permissible
ambient temperature at the cable gland 80° C
• Electrical data:
Feed voltage: 24 V (12 V available as alternative)
Lamp: 2 pin Halogen filament lamp
Depending on model, 20 W or 50 W
• Lamp holder:
2 pin socket
• Transformer:
Available as special accessory
• Integral switch:
The luminaries are fitted with non maintained push button
switch as standard
• Supply cable:
Temperature resistant supply cable – 3 m length – will have been
works fitted (Lapptherm 105 up to 90° C). Lumistar ME is ready
wired internally.
Stainless steel Lumiglas luminaire series Lumistar ME
Stainless steel Lumiglas luminaire series Lumistar ME
combined with screwed sightglass
lumiglas®
EN ISO 9001
Q A: 041003296
F.H.Papenmeier GmbH & Co. KG · division Lumiglas
Talweg 2 · 58239 Schwerte · GERMANY
phone: +49-2304/2050 · fax: +49-2304/205206
e-mail: info.lumi@papenmeier.de
www.lumiglas.de