عضویت 
ورود اعضا
راهنمای خرید
Sinpo (Guiyang Xintian)JD36 universal length measuring machine for length measurement0 pages
V
JD36/H
High Precision Universal Length Measurer
Characteristics
© High quality cast iron base after long time natural aging gives
good stability.
© Main measuring axis adopts optimized square design to assure
the stability of moving performance during measurement.
© It has many powerful optional accessories to satisfy different
measuring requirements.
© The grating illuminating system adopts infrared illuminating
device with low voltage, small volume and long life as light
sources.
© The instrument adopts high precision measuring system, which
conforms to the Abbe principle and has high measuring
accuracy.
© The imported grating system and subdivision card have high
accuracy and reliable stability;
© Powerful function software can correct the measuring error
caused by indicating value and temperature variation. And it has
the function of automatic reversal point detection.
Technical Parameters
Measuring range (mm):
External dimension: a. Direct measurement 0-100
b. Differential measurement 0-750
Internal dimension:
With small measuring yokes (depth of penetration up to 12mm,
maximum wall thickness 50mm)10 - 480
With large measuring yokes (depth of penetration up to 50mm,
maximum wall thickness 85mm)30 - 450
Measurement with electric equipment:
With electric measuring yoke 1 ~ 60
With universal measuring yoke 14-112
Digital display : 0.1 p m
© The series of Length Measuring Machine
Instrument Precision(20°C ± 0.2°C under this circumstance )
Model | External dimension direct measurement | Internal dimension measurement |
JD36 | 0.3 M m | 0.7 |
JD36-H | 0.2 nm | 0.6 M m |
Thread measurement:
Measuring the internal pitch diameter:
With small measuring yoke( thread small diameter 13-30)
With large measuring yoke [ thread small diameter 31 - (70-wall
thickness) x 2 ]
Pitch of screws 0.5 - 6
Measuring the external pitch diameter: Maximum value 200
Measuring force: 0, 1.5, 2.5N
Variability of the displaying value
Model | External measurement | Internal measurement |
JD36 | 0.3n m | 0.7 |
JD36-H | 0.2 u m | 0.6 u m |
Universal worktable:
Mounting area Approximately (160 x 160) mm
Adjusting range of height (0 - 100) mm
Transverse travel 25mm
Tilting rage around Y axis ± 3°
Worktable rotation ± 4°
Load capacity 10kg
Combination dimension of internal diameter contact tip : 06H7
Combination external dimension of measuring rod with contact
tip: 06g6
Overall Sizes of the Instrument (mm): 1060 x 390 x 450
Net weight of the instrument: 170kg
38
"
