filter0 pages
FILTER DRIERS
nnnnf » I HENRY
nnnnI TECHNOLOGIES
nnnnFeatures:
nnnn• A clean block from which all organic and volatile contaminants
nnnnare removed by the firing process
nnnn• Uniformly effective with permeability and absorbency
nnnnthroughout the molded core; micron filtration in depth will
nnnnremove and retain particles as small as 10 microns
nnnn• High stability in a unit of good mechanical strength and
nnnnmarked superiority In resistance to acid corrosion, moisture
nnnnincurred disintegration and fluid erosion; Insoluble In organic
nnnnliquids and moisture
nnnn• Removes dangerous acids
nnnn• Spring cushioning at Inlet end protects the block from rough
nnnnhandling
nnnn• Steel shell, maximum working pressure: 500 PSI (34.5 Bar)
nnnn• Copper ODS connections
nnnnThe drier is designed to function In both directions of
nnnnflow found in the reversible liquid line of heat pumps.
nnnnInternal check valves prevent release of collected
nnnncontaminants when the system switches from the
nnnnheating to cooling mode and back again.
nnnnLISTED
nnnnB
nnnnCat. No. | Heat F Size Conn. | 'ump Filter- Area Core Filter | Drier Se Dimei A | lection isions in B | nches C | Wt. Lbs. | Refrig Recommended Tonnage | erant R22 & Water Ca at 60 75°F | R134a p. Drops PPM 125°F | Flow Cap @2 PSI |
HP083-S | 3/8 | 18 | 2.5 | 5.38 | .47 | 1.22 | 1 thru 5 | 102 | 93 | 4.4 |
HP163-S | 3/8 | 28 | 3.0 | 6.00 | .17 | 1.76 | 1 thru 7 | 153 | 139 | 4.7 |
HP164-S | 1/2 | 28 | 3.0 | 6.25 | .53 | 1.76 | 1 thru 7 | 153 | 139 | 10.7 |
HP165-S | 5/8 | 28 | 3.0 | 6.50 | .66 | 1.84 | 1 thru 7 | 153 | 139 | 12.7 |
HENRY® Industrial & Commercial Refrigeration Products 800.96.HENRY
nnnnVALVE ~
nnnnH39
"