Testboy 200 pages

The Testboy 20 is a further development of the Testboy 2, which is
the most-sold continuity tester in Germany. Millions of satisfied
customers are proof of the reliability of this instrument.
The contact-less voltage sensor detects AC voltages through the
insulation. The capacitive measurement technique requires no
current flow. Thus, defective lamps in chains of Christmas tree
lights or cable breakages are indicated precisely within seconds.
Furthermore, the electronics also enable single-pole phase search.
Your advantages:
| 3 years manufacturer’s warranty
| TÜV / GS tested and approved
| IEC/EN 61010-1, DIN VDE 0411
As well as fulfi lling the functions of a classic cable and continuity
tester, the Testboy 20 is also equipped with a highperformance
LED torch that will shine for up to 80 hours using the batteries
supplied.
The dielectric strength up to 400 V makes the device unique!
A glow lamp is triggered by the integrated current alarm to warn
against touching dangerous live wires. Identifying wire pairs
through continuity testing is a standard task for the Testboy 20.
Due to the ease with which it can be operated and its suitability for
use in a wide range of applications, the Testboy 20 is an obligatory
piece of equipment for every electrician and service technician.
Technical Details
Testboy 20
Continuity Test
optical 0 to 20Ω
acoustical 0 to 250Ω
Test Voltage
4,5V
Test Current
optical ~10mA
acoustical ~2mA
Power Supply
3x 1,5V
Overvoltage Protection 400V
Dimensions
120 x 60 x 30 mm
Overload Category
CAT III 400V
Protection
IP 44