Testboy Profi LED0 pages

Due to its wide performance spectrum, the Testboy Profi LED is one of the most sought after
products in our assortment.
The Testboy Profi LED combines the following five functions in one device:
| Displays DC and AC voltages from 12 to 690V
| Single-pole phase testing
| Two-pole phase sequence testing
| Continuity testing up to 500kΩ
| RCD fault testing
The professional appearance is underlined by the mix of materials used in the plastic housing and
the rubber handle.
The display area is protected by a break-proof plastic disk.
Your advantages:
| 3 years manufacturer’s warranty
| TÜV / GS tested and approved
| IEC/EN 61243-3, DIN VDE 0682-401
To ensure that the protective earth can also be tested, the automatic load function prevents the
RCD switch from being triggered. Even when in daily use, the robust construction as well as the
dust and waterproof housing guarantee a long service life. The test tips are protected by a
removable cap that in turn is secured to the device. The Testboy Profi LED is even with empty
batteries operational for the voltage and phase test.
Technical Details
Testboy Profi LED
Display
optical, 10 LEDs, red
Operating Panel
finger tip
Measurement Range automatic range
Voltage Test
12 to 690V AC/DC, 0 to 400 Hz
Continuity Test
0 to 500 kΩ with acoustical signal
Phase Indication
> 100V AC
Automatic Resistance Is ~ 30mA ED(DT) = 30 sec.
Power Supply
2x 1,5V
Overload Category
CAT III 690V
Dimension
238 x 70 x 30 mm
Protection
IP 65
Weight
200g