Testboy Profi LCD Plus0 pages
Due to its wide performance spectrum, the Testboy Profi LCD Plus is one of the most sought
after products in our assortment.
The Profi LCD Plus combined the following 12 features in one unit:
| Display DC and AC voltage from 6 to 1000V
| Single–pole phase testing
| Two – pole phase sequence indication
| Continuity testing up to 150Ω (acoustically)
| Resistance testing up to 2000Ω
| Diode testing
| Data – Hold
| Backlight lever sensor
| RCD – testing lever two button
| LED torch lamp
| Removable 4 mm test tips adaptor
| Auto – Power - Off
An Auto - Power - Off function impeded a fast discharging of the battery. The extremely
accurate LC display is particularly professional; service or installtion technicans are easily able
to display the phase or phase sequence. When the probe tips are connected to an AC voltage
within the nominal voltage range, the reading is displayed in volts and the “+~-” LED indicator
lights up. From a voltage more than 35V (life risk) a buzzer sounds up. The switchable load per
button impeded the unmeant triggering of the RCD – switch, so that the protective earthing
conductor can be measure as well. The professional appearance is underlined by the mix of
materials used in the plastic housing and the rubber handle. The Display area is protected by a
break proof plastic disk.
Your advantages:
| 5 years manufacturer’s warranty
| TÜV/GS tested and approved
| IEC/EN 61243-3 (DIN VDE 0628-401)
Technical Details
Testboy Profi LCD Plus
Display
optical 3 1/2 digit, LCD
Operating panel
fi nger tip, RCD button, ON/OFF button, D–Hold button
Measurement Range automatic range
Voltage Test
6 -1000V AC/DC, 0- 400Hz
Resistance Test
0 - 2000Ω
Continuity Test
0 ~ 150Ω with acoustical signal