MBUX 420 - Nozzle separator for hygienic, pressurised recovery of microorganisms0 pages

Nozzle separator for hygienic, pressurised recovery of microorganisms
MBUX 420
The Alfa Laval centrifuges for recovery of yeast and other microorganisms take advantage of the fact that the slurry of concentrated solids is pseudo-plastic and flows easily in the bowl against the centrifugal force. This means that the recovered
solids can be obtained with a low demand on energy in a closed system under pressure. Therefore, the hygienic conditions are very good, further improved by a full-speed CIP procedure. The MBUX 420 has a bowl body in Super Duplex stainless steel, for added strength and corrosion resistance.
Applications
The solids discharging nozzle centrifuge type MBUX 420 is designed for separation of micro-organisms from fermentation broths, e.g. in chemical and pharmaceutical industries, and for yeast extract production.
Special features
With the patented Alfa Laval self regulating vortex nozzles the concentration of discharged solids phase can be kept at a high and even level irrespective of fluctuations in the feed flow or feed concentration. The centrifuge can thus be operated closer to the clogging point without increasing the risk of clogging.
The light and heavy phase are both discharged under pressure which prevents foaming and simplifies installation by eliminating pump systems and improves the hygiene. Solids pockets in the bowl guide the solids to the concentrate tubes, preventing accumulation of firmly packed solids and making separation and Cleaning In Place (CIP) easier and more effective.
Automated CIP at full speed.
Frame hood and solids receptacle are jacketed for circulation of cooling water, which also reduce the noise level. Frame hood is fitted with a spray nozzle for washing the outside of the bowl. A rotating liquid seal below the bowl seals off the bowl casing from the drive system.
MBUX 420
Standard design
The MBUX 420 has all liquid-wetted parts in high-grade stainless
steel and rubber sealings food approved EPDM or nitrile rubber. Connections for inlet, centrifugate and concentrate are hygienic screw couplings. The separator is equipped with speed and vibration sensors. The anchoring feet are equipped with vibration dampers. The MBUX 420 is driven via a belt by a flange-mounted controlled torque motor. The separator is delivered with the motor pre-mounted at the factory so there is no need for alignment on site.