AccuSep® Inorganic Membranes0 pages

AccuSep™ Inorganic Membranes
Selection Guide E78a
Description
Pall AccuSep filter elements, which are available in a
seamless, tubular format, are high performance, low cost
inorganic microfiltration products. These sintered metal filter
elements are produced by a proprietary process which
creates a high void volume, strong and very uniform
medium. This medium is relatively thin, resulting in a
structure that is up to 3 times more permeable than that
found in conventional pressed sintered metal tubes.
Available Sizes
Standard Nominal Outer Diameters:
12 inch/12.7 mm and 34 inch/19.05 mm
Standard Lengths: Up to 8 ft/2.43 m long
Medium Wall Thickness:
Configurations
Examples of standard configurations are:
Pall will provide custom configurations to meet your
requirements.
Available Metallurgy
316L Stainless Steel - standard
304L Stainless Steel
310SC Stainless Steel
Hastelloy X
Inconel 600
The filter element hardware is dictated by the operating
conditions of the application.
AccuSep™ Filter Element
Tube Outer Filter Area Filter Area Nominal Wall
Diameter (Sq Ft) (Sq M) Thickness
inches/mm per linear per linear inches/mm
foot meter
0.47/11.8 0.12 0.037 0.018/0.46
0.72/18.2 0.19 0.057 0.025/0.63
Configuration Typical Use
Single tube, double open Cross flow element
ended OEM product
Substrate for additional
functional coatings
Single tube, single open Backwashable filter
ended, tube flare connection element
on the end
Single or multi-tube assembly, Blowback filter element
single open ended, connected
to blowback venturi on the Retrofits existing porous
open end metal or polymeric bag
house filters
Multi-tube or larger assembly, Filter element
double open ended, gasket
seals
Multi-tube or larger assembly, Filter element
single open ended,
threaded open end