HY-OPTIMA TM 17000 pages

HY-OPTIMATM 1700 Intrinsically Safe In-line Process Hydrogen Analyzer
Description
H2scan’s HY-OPTIMATM 1700 in-line, real time hydrogen-specific process analyzers are designed for ease of use,
interface flexibility and true process control. The HY-OPTIMATM 1700 is an intrinsically safe device that incorporates
our patented solid-state sensor and is configured to operate in background gas streams with up to 95% relative
humidity and temperatures up to100ºC. The HY-OPTIMATM 1700 is ideal for process gas streams containing virtually
no contaminants and where real time continuous measurements of hydrogen can increase process plant efficiencies,
improve diagnostics and enhance maintenance management translating into higher profitability.

Operating Conditions

Hydrogen Sensitivity Range:
0.5% to 100% hydrogen by volume at 1 ATM
Response Time: T90 < 30 sec
Ingress Protection: IP64 capable
Recommended Verification Interval: 90 days
Product Life Expectancy: 10 years
Accuracy(*):
± 0.3% absolute for 0.5 to 10% H2
± 1.0% absolute for 10 to 100% H2
Drift/week:
± 0.2% absolute for 0.5 to 10% H2
± 0.4% absolute for 10 to 100% H2
Repeatability:
± 0.2% absolute for 0.5 to 10% H2
± 0.4% absolute for 10 to 100% H2
Linearity:
0.2% absolute for 0.5-10% H2
0.4% absolute for 10-100% H2

Operating Humidity: 0% to 95% RH
Flow Rate: 0.1 slpm to 50 slpm
Pressure: 0 to 7 bar gauge, 0 to 100 psi gauge
Process Gas Temperature Range: -20ºC to 100ºC
Operating Temperature Range: -20ºC to 40ºC
Storage Temperature Range: -40ºC to 50ºC
Calibration Background Gas: Nitrogen

Interface Options
Power Barrier Input Voltage: 24 VDC nominal
Power Barrier Input Voltage Range: 20 VDC to 28 VDC
Intrinsically Safe Sensor Input Voltage: 10 VDC
Sensor Input Voltage Range: 5 VDC to 28 VDC
Input Power: 10 W
Analog Output: 4 mA to 20 mA
Serial Communication: RS422

Certifications
0359
II 1 G, Ex ia II H2, d+d IIB T3
II 2 G, Ex ib II H2, ib d IIB T3
ITS07ATEX25634X

Included Accessories
Intrinsically Safe Power Barrier
Armored Power / Analog Cable: 4 m
Calibration Cup

Optional Accessories
Single Channel Intrinsically Safe Analog Output Barrier
(with or without relays)
Single Channel Intrinsically Safe RS422 Serial Interface
Barrier
Serial Interface Cable: 4 m (custom lengths available)
Armored Power / Analog Cable (custom lengths
available)

Adapter Fittings
½ in. MNPT thread
½ in. FNPT thread
-8 SAE/MS thread size
… and many other industry standards

Dimensions

Total Length: 10.3 in.
Length of Enclosure: 6.8 in.
Length of Tube: 2.9 in.
Width: 3.4 in.
Depth: 1.4 in.

Sensor performance specifications are only valid for units configured for a maximum 65ºC dry process stream temperature. All figures
assume pressure compensation, operating in ambient that do not contain Oxygen and are in addition to any errors in the gasses used. The
accuracy is specified for serial port output only.
HY-OPTIMATM is a registered Trademark of H2scan
Specifications subject to change without prior notice.
90000010 R5

27215 Turnberry Lane, Unit A, Castaic CA., 91384
Tel: 661-775-9575, Fax: 661-775-951
Email: sales@h2scan.com, Website: www.h2scan.com

For Latest Revision go to www.h2scan.com

Performance